Most Kenmore dryer repairs in Sullivan City involve the same few systems: heat, airflow, the drum drive and the controls. The Sullivan City list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Sullivan City work on Kenmore dryers every week.
Kenmore Dryer Repair Near Sullivan City
Our data shows 37 appliance repair companies inside a 30-mile radius of Sullivan City. The rest are spread across McAllen (25), Mission (4), and Edinburg (4). No company within 90 miles of Sullivan City mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Alanis Repair is the nearest, roughly 11.4 miles from Sullivan City. Across 34 rated companies, the average public rating is 4.4 stars.
Companies are shown by relevance and distance from Sullivan City. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Show laundry appliance work | 4 |
|---|---|
| Open on Saturdays (per listing) | 22 |
| Mention Kenmore | 0 |
| Appliance repair companies in range (30 mi) | 37 |
| With 4.5+ stars and at least 10 reviews | 5 |
| Three nearest companies, miles away | 11.4, 14.9, 15.6 |
Closest matches for Sullivan City: Treviño Appliance - Sales, Service & Parts (24.2 miles away, based in Pharr, 4.7 stars from 232 reviews, lists Saturday hours); Sears Appliance Repair (21.6 miles away, based in McAllen, 4.4 stars from 290 reviews, lists Saturday hours); Treviño Appliance - Sales, Service & Parts (25.6 miles away, based in Edinburg, 4.4 stars from 104 reviews, lists Saturday hours); Trooper's Appliance Repair (17.6 miles away, based in Mission, 4.9 stars from 266 reviews, lists Saturday hours).
Kenmore Dryer Lines and Features
What Makes Kenmore Dryer Repairs Different
Kenmore's Check Vent sensor alerts the owner when the dryer is not moving enough air to the outside. Source: Kenmore - Laundry List: Kenmore Dryer Buying Guide
Kenmore Dryer Symptoms and First Checks
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer takes too long to dry. Kenmore says to clean the lint filter of lint and softener residue and check the exhaust duct for buildup or excess length. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Error Codes
| Code | What it means |
|---|---|
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Signs Your Kenmore Dryer Needs a Technician
- Squealing, thumping or grinding while it runs
- Clothes still damp after a full cycle
- Cycles take two or three runs to finish
How a Dryer Service Call Usually Goes in Sullivan City
Care Kenmore Recommends for Its Dryers
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- How long the vent run is and where it exits the house
- Any error code on the display
- Whether the dryer is gas or electric
Around Sullivan City
Most dryer calls in Sullivan City come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Before You Book in Sullivan City
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
- Will you check the vent and lint path as part of the visit?
- What guarantee do you give on parts and labor?
Kenmore Dryer Repair FAQs: Sullivan City, TX
Why do my clothes come out damp?
What should I do about a Kenmore error code?
What makes a dryer stop heating?
Related Repair Pages for Sullivan City
Kenmore Dryer Repair in Nearby Cities
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.