A Kenmore dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. The Silver Firs list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Who Works on Kenmore Dryers Near Silver Firs
We found 40 appliance repair companies within 30 miles of Silver Firs. The rest are spread across Everett (12), Bothell (7), and Lynnwood (7). Distances run up to about 8 miles. The closest is HotWire Furnace, Air Conditioning & Appliance Repair Everett, about 1.1 miles away. No company within 30 miles of Silver Firs names Kenmore in its listing, so the list adds matches from farther out and the closest appliance repair companies. Across 30 rated companies, the average public rating is 4.8 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Show laundry appliance work | 14 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 28 |
| Mention Kenmore | 0 |
| Appliance repair companies in range (30 mi) | 60 |
| Open on Saturdays (per listing) | 46 |
| Three nearest companies, miles away | 1.1, 1.3, 1.6 |
First up for Silver Firs: Sears Appliance Repair (89.7 miles away, based in Chehalis, 4.4 stars from 134 reviews, lists Saturday hours); HotWire Furnace, Air Conditioning & Appliance Repair Bothell (6.5 miles away, based in Bothell, 4.9 stars from 1,493 reviews, lists Saturday hours); Sears Appliance Repair (6.1 miles away, based in Lynnwood, 4.7 stars from 413 reviews); Fast Appliances Repair (7.5 miles away, based in Edmonds, 4.9 stars from 116 reviews, lists Saturday hours).
Kenmore Dryer Features Technicians Work On
What Makes Kenmore Dryer Repairs Different
Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Common Kenmore Dryer Problems
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Reading a Kenmore Dryer Error Code
| Code | What it means |
|---|---|
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
When to Call for Kenmore Dryer Repair
- Dryer shuts off a few minutes into the cycle
- Drum will not turn even though you hear a hum
- Dryer will not start when you press Start
How a Dryer Service Call Usually Goes in Silver Firs
Keeping a Kenmore Dryer Running
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Any error code on the display
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- The brand, model and serial number from the label inside the door or on the back panel
Local Notes for Silver Firs
Most dryer calls in Silver Firs come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
Washington's state plumber certification law defines plumbing as potable water, waste, medical gas and similar systems and does not list fuel gas piping, so gas line work is not part of the state plumber certificate. Source: Chapter 18.106 RCW, Plumbers
Questions to Ask a Silver Firs Technician
- Do you work on gas dryers, and who handles anything involving the gas line?
- Can you give a written estimate before ordering parts?
- What guarantee do you give on parts and labor?
Kenmore Dryer Repair FAQs: Silver Firs, WA
Do you work for Kenmore?
Why is my dryer running but not heating?
How do I find a technician who knows Kenmore dryers?
Related Repair Pages for Silver Firs
Kenmore Dryer Repair Near Silver Firs
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.