If your Kenmore dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. Below are independent repair companies serving Stanwood, with those that mention Kenmore first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Independent Kenmore Dryer Technicians, Stanwood WA
38 repair companies serve Stanwood from within 30 miles. The rest are spread across Everett (15), Lynnwood (7), and Lake Stevens (4). The farthest listed company is about 29 miles out. Appliance Repair Guys is the nearest, roughly 10.1 miles from Stanwood. No company within 90 miles of Stanwood mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.7 stars across 32 businesses.
Companies are shown by relevance and distance from Stanwood. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| List dryer or washer & dryer work | 11 |
|---|---|
| Three nearest companies, miles away | 10.1, 11.8, 12.5 |
| With 4.5+ stars and at least 10 reviews | 21 |
| Mention Kenmore | 0 |
| Listing Saturday hours | 26 |
| Repair companies inside 30 miles | 38 |
Closest matches for Stanwood: Appliance Mechanics (20.3 miles away, based in Lake Stevens, 4.9 stars from 445 reviews); Fast Appliances Repair (26.7 miles away, based in Edmonds, 4.9 stars from 116 reviews, lists Saturday hours); Sears Appliance Repair (28.9 miles away, based in Lynnwood, 4.7 stars from 413 reviews); Ace Appliance Service (25.6 miles away, based in Everett, 5.0 stars from 322 reviews).
Kenmore Dryer Lines and Features
What Makes Kenmore Dryer Repairs Different
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
SmartDry Ultra dryers combine two moisture sensors with a temperature monitor and a dual heating element to fine-tune heat and cycle length. Source: Kenmore - 8.8 cu. ft. Electric Dryer w/ SmartDry Ultra Technology
Kenmore Dryer Symptoms and First Checks
- Dryer takes too long to dry. Kenmore says to clean the lint filter of lint and softener residue and check the exhaust duct for buildup or excess length. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Error Codes
| Code | What it means |
|---|---|
| CHECK FILTER (Elite steam dryers) | A reminder to clean the lint filter before the load. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| tE1-tE7 (Elite steam dryers) | A temperature sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Kenmore Dryer Problems Worth a Service Call
- Drum turns but the air stays cool
- Burning or hot smell during a cycle
- Outside of the cabinet gets unusually hot
Inside a Dryer Repair Visit
Keeping a Kenmore Dryer Running
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
What Kenmore Dryer Repairs Cost
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
- Any error code on the display
Dryer Notes for Stanwood, WA
Most dryer calls in Stanwood come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
Washington's state plumber certification law defines plumbing as potable water, waste, medical gas and similar systems and does not list fuel gas piping, so gas line work is not part of the state plumber certificate. Source: Chapter 18.106 RCW, Plumbers
Hiring a Dryer Repair Company in Stanwood
- Can you look at the washer on the same visit if it is acting up too?
- Do you work on gas dryers, and who handles anything involving the gas line?
- What guarantee do you give on parts and labor?
Kenmore Dryer Repair FAQs: Stanwood, WA
What makes a dryer stop heating?
What should I do about a Kenmore error code?
Which Stanwood technicians work on Kenmore?
Other Dryer Repair in Stanwood
More Kenmore Dryer Repair Pages Nearby
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.