Kenmore Dryer Repair in Plover, WI

Most Kenmore dryer repairs in Plover involve the same few systems: heat, airflow, the drum drive and the controls. The Plover list starts with companies that name Kenmore, followed by other appliance repair companies that list dryer work.

This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.

If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Plover work on Kenmore dryers every week.

Who Works on Kenmore Dryers Near Plover

We found 29 appliance repair companies within 60 miles of Plover. 1 list an address in Plover, and other nearby bases include Appleton (7), Oshkosh (4), and Stevens Point (2). Distances run up to about 59 miles. None of the companies within 60 miles mention Kenmore by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Nearest on the list: K P Appliance Inc, around 1.4 miles out. Across 28 rated companies, the average public rating is 4.2 stars. Plover is a smaller market, so expect a longer drive and ask whether a trip charge applies.

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

First up for Plover: Sears Appliance Repair (76.9 miles away, based in Beaver Dam, 4.5 stars from 86 reviews, lists Saturday hours); Sears Appliance Repair (5.3 miles away, based in Stevens Point, 4.4 stars from 99 reviews, lists Saturday hours); M&S Appliance Repair (13.4 miles away, based in Wisconsin Rapids, 4.6 stars from 60 reviews, lists Saturday hours); Extreme Care Appliance Repair (14.8 miles away, based in Wisconsin Rapids, 4.3 stars from 59 reviews, lists Saturday hours).

Know Your Kenmore Dryer

How Kenmore Dryers Are Built

Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)

Kenmore's Check Vent sensor alerts the owner when the dryer is not moving enough air to the outside. Source: Kenmore - Laundry List: Kenmore Dryer Buying Guide

Common Kenmore Dryer Problems

• Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
• Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)

Reading a Kenmore Dryer Error Code

Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam

Signs Your Kenmore Dryer Needs a Technician

• Drum will not turn even though you hear a hum
• Dryer will not start when you press Start
• Burning or hot smell during a cycle

What Gets Fixed on a Plover Dryer Call

Care Kenmore Recommends for Its Dryers

• Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
• To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)

Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.

Budgeting for a Kenmore Dryer Repair

Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:

• Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
• Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
• Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
• Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
• Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?

A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

Getting Ready for the Repair

• The brand, model and serial number from the label inside the door or on the back panel
• How long the vent run is and where it exits the house
• Whether the dryer is gas or electric

What Plover Owners Should Know

Most dryer calls in Plover come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

How to Choose a Dryer Technician Near Plover

• Do you work on gas dryers, and who handles anything involving the gas line?
• How often do you repair Kenmore dryers, and do you carry common parts on the truck?
• Will you check the vent and lint path as part of the visit?

Kenmore Dryer Repair FAQs: Plover, WI

Related Repair Pages for Plover

Kenmore Dryer Repair in Nearby Cities

Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.