Samsung Dryer Repair in Beltsville, MD

A Samsung dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. Below are independent repair companies serving Beltsville, with those that mention Samsung first, then the nearest dryer repair companies.

Washer and Dryer Repair is independent and not affiliated with Samsung. Listed companies are independent technicians who repair Samsung dryers and other brands.

Independent Samsung Dryer Technicians, Beltsville MD

40 repair companies serve Beltsville from within 30 miles. 3 list an address in Beltsville, and the rest are spread across Silver Spring (12), Laurel (6), and Hyattsville (4). No company within 90 miles of Beltsville mentions Samsung by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is EMR - Commercial Kitchen Service, Parts, Installation, about 1.0 miles away. Across 35 rated companies, the average public rating is 4.4 stars.

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

At the top of the Beltsville list: Sears Appliance Repair (3.6 miles away, based in Silver Spring, 4.0 stars from 1,337 reviews, lists Saturday hours); TruFix Appliance Repair & Services, LLC (6.7 miles away, based in Silver Spring, 4.8 stars from 240 reviews, lists Saturday hours); Sears Appliance Repair (6.0 miles away, based in Hyattsville, 4.4 stars from 398 reviews, lists Saturday hours); Power Tech Appliance Service (4.8 miles away, based in Laurel, 4.1 stars from 42 reviews, lists Saturday hours).

Samsung Dryer Lines and Features

How Samsung Dryers Are Built

The Bespoke AI Laundry Combo uses a ventless heat pump to dry inside the same drum used for washing, so there is no exhaust duct to service. Source: Samsung Newsroom US - Samsung expands Bespoke AI laundry line

Sensor Dry cycles rely on two curved metal moisture-sensor bars inside the front of the drum near the lint filter housing, and fabric softener sheet residue on them can make cycles end with damp clothes. Source: Samsung US - Clothes are not dry after using Samsung dryer

Common Samsung Dryer Problems

• Cycle ends with clothes still damp. Clean the moisture sensors, pick a higher dry level and make sure the load is at least about four bath towels. Source: Samsung US - Clothes are not dry after using Samsung dryer
• Dryer not heating. Run Time Dry briefly to confirm there is no heat, then check the 240V outlet or gas supply, cycle the breaker, and run the vent blockage test. Source: Samsung US - Clothes are not dry after using Samsung dryer

Reading a Samsung Dryer Error Code

Full list: Samsung Dryer Error Codes Explained.

Smart Care lets the owner press a button on the washer or dryer to display a diagnostic code that the Samsung app scans and turns into troubleshooting steps, while Wi-Fi models offer the same check inside the SmartThings app. Source: Samsung US - Use Smart Care on your Samsung washer and dryer

Samsung Dryer Problems Worth a Service Call

• Clothes still damp after a full cycle
• Dryer shuts off a few minutes into the cycle
• Outside of the cabinet gets unusually hot

What a Dryer Repair Technician Checks

Keeping a Samsung Dryer Running

• Level the dryer by adjusting the feet with a carpenter's level to reduce rattling and vibration. Source: Samsung US - Samsung dryer is too noisy
• Clean the lint filter before or after every drying cycle. Source: Samsung US - Clothes are not dry after using Samsung dryer

Brand guides: Samsung Dryer Not Heating: Causes and Fixes, Samsung Dryer Not Drying: What to Check, Samsung Dryer Error Codes Explained.

What Samsung Dryer Repairs Cost

Price the repair before replacing a Samsung dryer. Published ranges for common jobs:

• Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
• Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
• Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
• Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
• Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?

If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

What to Have Ready for a Samsung Dryer Call

• What happens when you press Start (no response, hum, runs with no heat, stops early)
• Any error code on the display
• How long the vent run is and where it exits the house

Local Notes for Beltsville

Most dryer calls in Beltsville come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Before You Book in Beltsville

• What guarantee do you give on parts and labor?
• What is the service call or diagnostic fee, and is it applied to the repair?
• Do you work on gas dryers, and who handles anything involving the gas line?

Samsung Dryer Repair FAQs: Beltsville, MD

More Laundry Repair in Beltsville, MD

More Samsung Dryer Repair Pages Nearby

Write down any error code your Samsung dryer shows and when it appears. It helps a Beltsville technician bring the right parts.