If your GE dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
GE Dryer Repair Near Beltsville
Within 30 miles of Beltsville there are 40 appliance repair companies in our data. 3 of them are based in Beltsville itself, and other nearby bases include Silver Spring (12), Laurel (6), and Hyattsville (4). Distances run up to about 7 miles. No company within 30 miles of Beltsville names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Nearest on the list: EMR - Commercial Kitchen Service, Parts, Installation, around 1.0 miles out. The 35 rated companies in range average 4.4 stars.
Companies are shown by relevance and distance from Beltsville. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Distance to the three closest (mi) | 1.0, 1.0, 2.2 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 11 |
| Open on Saturdays (per listing) | 40 |
| Repair companies inside 30 miles | 60 |
| Mention GE | 0 |
| List dryer or washer & dryer work | 6 |
First up for Beltsville: District-Columbia Hotpoint Rpr (11.6 miles away, based in Washington, 5.0 stars from 4 reviews, lists Saturday hours); Sears Appliance Repair (6.0 miles away, based in Hyattsville, 4.4 stars from 398 reviews, lists Saturday hours); Sears Appliance Repair (3.6 miles away, based in Silver Spring, 4.0 stars from 1,337 reviews, lists Saturday hours); TruFix Appliance Repair & Services, LLC (6.7 miles away, based in Silver Spring, 4.8 stars from 240 reviews, lists Saturday hours).
GE Dryer Lines and Features
What a GE Dryer Technician Deals With
GE allows only rigid or flexible metal vent duct and says plastic flexible duct is not acceptable because it collapses, cuts airflow and can collect water. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
GE Dryer Symptoms and First Checks
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
GE Dryer Error Codes
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Drum will not turn even though you hear a hum
- Dryer will not start when you press Start
- Dryer shuts off a few minutes into the cycle
Inside a Dryer Repair Visit
Care GE Recommends for Its Dryers
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- The brand, model and serial number from the label inside the door or on the back panel
- How long the vent run is and where it exits the house
What Beltsville Owners Should Know
Most dryer calls in Beltsville come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)
The Maryland Board of Plumbing issues master, journey and apprentice natural gas fitter licenses and a propane gas fitter certificate, and recognizes certain Baltimore County and WSSC gas fitter licenses. Source: Md. Code, Business Occupations and Professions § 12-302 (Maryland General Assembly)
Hiring a Dryer Repair Company in Beltsville
- Is your company licensed where my state requires it, and insured?
- If a part has to be ordered, how soon can you come back to finish?
- What guarantee do you give on parts and labor?
GE Dryer Repair FAQs: Beltsville, MD
Is this GE customer service?
Which Beltsville technicians work on GE?
Is my GE dryer worth repairing?
Why does my GE dryer show an error code?
Related Repair Pages for Beltsville
More GE Dryer Repair Pages Nearby
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.