A Whirlpool dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. Below are independent repair companies serving Skokie, with those that mention Whirlpool first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Whirlpool. If your dryer is still under manufacturer coverage, contact Whirlpool directly.
Independent Whirlpool Dryer Technicians, Skokie IL
We found 40 appliance repair companies within 30 miles of Skokie. 8 list an address in Skokie, and other nearby bases include Evanston (10), Chicago (9), and Lincolnwood (3). The closest is A Plus Appliance Repair Inc, about 0.6 miles away. None of the companies within 30 miles mention Whirlpool by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Across 37 rated companies, the average public rating is 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 23 |
|---|---|
| Appliance repair companies in range (30 mi) | 60 |
| Show laundry appliance work | 20 |
| Open on Saturdays (per listing) | 51 |
| Mention Whirlpool | 0 |
| Distance to the three closest (mi) | 0.6, 0.7, 0.9 |
First up for Skokie: Whirlpool Appliance Repair (7.0 miles away, based in Chicago, 1.4 stars from 33 reviews, lists Saturday hours); UltraFix Appliance Repair (4.3 miles away, based in Glenview, 4.8 stars from 855 reviews, lists Saturday hours); A Plus Appliance Repair Inc (0.6 miles away, 4.9 stars from 418 reviews, lists Saturday hours); Appliance Repair Stars (3.8 miles away, based in Chicago, 5.0 stars from 174 reviews, lists Saturday hours).
Whirlpool Dryer Features Technicians Work On
What Makes Whirlpool Dryer Repairs Different
Many models detect restricted exhaust airflow and show an AF or F4E3 code while continuing to run. Source: Whirlpool Product Help - Error Codes in Dryers
Electric Whirlpool dryers run on 240 volts from two breakers or fuses, one feeding the motor and one the heating element, so a single tripped breaker can leave the drum turning with no heat. Source: Whirlpool Product Help - Dryer is Not Heating
What Whirlpool Says to Check First
- Dryer won't start. Press and hold Start for a few seconds, confirm the door is fully latched and Controls Locked is off, and check the household fuses or breakers. Source: Whirlpool Product Help - Dryer Not Starting or No Operation
- Dryer takes too long to dry. Clean the lint screen, check that the vent is metal, short and unkinked with a free-moving outside flap, and avoid overloading. Source: Whirlpool Product Help - Dryer is not Drying or Experiencing Long Dry Times
Reading a Whirlpool Dryer Error Code
| Code | What it means |
|---|---|
| F# E# (alternating) | The control has detected a fault that needs a service technician. Source: Whirlpool Product Help - Error Codes in Dryers |
| AF / F4E3 | Restricted airflow from a clogged lint screen or a blocked, crushed or overly bent vent. Source: Whirlpool Product Help - Error Codes in Dryers |
| PF | A power failure interrupted the cycle; press and hold Start to resume. Source: Whirlpool Product Help - Error Codes in Dryers |
When to Call for Whirlpool Dryer Repair
- Drum turns but the air stays cool
- Cycles take two or three runs to finish
- Drum will not turn even though you hear a hum
How a Dryer Service Call Usually Goes in Skokie
Keeping a Whirlpool Dryer Running
- Keep the dryer level with all four legs on the floor to prevent pounding noises. Source: Whirlpool Product Help - Sounds or Noises in a Dryer
- Clean the outside exhaust venting every one to two years, or sooner if drying slows, and make sure the exterior hood flap opens freely. Source: Whirlpool Product Help - Dryer is not Drying or Experiencing Long Dry Times
Brand guides: Whirlpool Dryer Not Heating: What to Check.
Budgeting for a Whirlpool Dryer Repair
A Whirlpool dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Any error code on the display
- The brand, model and serial number from the label inside the door or on the back panel
- What happens when you press Start (no response, hum, runs with no heat, stops early)
What Skokie Owners Should Know
Most dryer calls in Skokie come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
In Illinois, you can check a license with the Illinois Department of Public Health Plumber License Search or report a problem to the Illinois Attorney General Consumer Fraud Bureau.
How to Choose a Dryer Technician Near Skokie
- How often do you repair Whirlpool dryers, and do you carry common parts on the truck?
- What guarantee do you give on parts and labor?
- Is your company licensed where my state requires it, and insured?
Whirlpool Dryer Repair FAQs: Skokie, IL
Is my Whirlpool dryer worth repairing?
Why do my clothes come out damp?
Why does my Whirlpool dryer show an error code?
Do you work for Whirlpool?
Related Repair Pages for Skokie
Whirlpool Dryer Repair Near Skokie
Before you call, find the model and serial number on your Whirlpool dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.