If your Whirlpool dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. We flag companies whose listing or website mentions Whirlpool and fill in with nearby dryer repair companies so you always have options.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Whirlpool. If your dryer is still under manufacturer coverage, contact Whirlpool directly.
Independent Whirlpool Dryer Technicians, Marble Falls TX
38 repair companies serve Marble Falls from within 30 miles. 5 list an address in Marble Falls, and other nearby bases include Leander (14), Austin (6), and Cedar Park (6). The farthest listed company is about 30 miles out. No company within 30 miles of Marble Falls names Whirlpool in its listing, so the list adds matches from farther out and the closest appliance repair companies. Marble Falls Appliance Repair is the nearest, roughly 0.4 miles from Marble Falls. The 38 rated companies in range average 4.6 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 21 |
|---|---|
| Appliance repair companies in range (30 mi) | 38 |
| Show laundry appliance work | 10 |
| Mention Whirlpool | 0 |
| Open on Saturdays (per listing) | 24 |
| Three nearest companies, miles away | 0.4, 1.4, 1.6 |
Closest matches for Marble Falls: Sears Appliance Repair (68.1 miles away, based in Gatesville, 4.5 stars from 96 reviews, lists Saturday hours); Excellence Appliance Repair (27.3 miles away, based in Leander, 4.8 stars from 1,261 reviews, lists Saturday hours); Texcen Appliance Repair (25.2 miles away, based in Leander, 4.7 stars from 464 reviews); Highland Lakes Appliance Repair (12.3 miles away, based in Kingsland, 4.9 stars from 58 reviews, lists Saturday hours).
Whirlpool Dryer Lines and Features
How Whirlpool Dryers Are Built
The HybridCare dryer uses a heat pump to dry and recycle the same air, so it needs no vent to the outside. Source: Whirlpool Corporation - HybridCare clothes dryer earns award
Many models detect restricted exhaust airflow and show an AF or F4E3 code while continuing to run. Source: Whirlpool Product Help - Error Codes in Dryers
Whirlpool Dryer Symptoms and First Checks
- Dryer not heating. Make sure a heated cycle is selected rather than Air Only, then check both breakers and the 240-volt supply on electric models or the open gas shutoff valve on gas models. Source: Whirlpool Product Help - Dryer is Not Heating
- Dryer won't start. Press and hold Start for a few seconds, confirm the door is fully latched and Controls Locked is off, and check the household fuses or breakers. Source: Whirlpool Product Help - Dryer Not Starting or No Operation
What Whirlpool Dryer Codes Mean
| Code | What it means |
|---|---|
| PF | A power failure interrupted the cycle; press and hold Start to resume. Source: Whirlpool Product Help - Error Codes in Dryers |
| AF / F4E3 | Restricted airflow from a clogged lint screen or a blocked, crushed or overly bent vent. Source: Whirlpool Product Help - Error Codes in Dryers |
| F# E# (alternating) | The control has detected a fault that needs a service technician. Source: Whirlpool Product Help - Error Codes in Dryers |
Signs Your Whirlpool Dryer Needs a Technician
- Drum turns but the air stays cool
- Squealing, thumping or grinding while it runs
- Burning or hot smell during a cycle
Inside a Dryer Repair Visit
Owner Care for Whirlpool Dryers
- Empty the lint screen before every load, and wash it with warm water and a soft brush if fabric softener sheets leave a film. Source: Whirlpool Product Help - Dryer is not Drying or Experiencing Long Dry Times
- Use rigid or semi-rigid metal vent duct rather than plastic or foil accordion duct, and keep the run short and straight. Source: Whirlpool Product Help - Dryer is not Drying or Experiencing Long Dry Times
Brand guides: Whirlpool Dryer Not Heating: What to Check.
Budgeting for a Whirlpool Dryer Repair
A Whirlpool dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
- Whether the dryer is gas or electric
Dryer Notes for Marble Falls, TX
Most dryer calls in Marble Falls come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
Gas piping counts as plumbing in Texas and requires a plumbing license, with an exemption for LP gas installers who hold a separate state LP gas license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §§1301.002, 1301.055 (Texas State Board of Plumbing Examiners)
Before You Book in Marble Falls
- Will you check the vent and lint path as part of the visit?
- Do you work on gas dryers, and who handles anything involving the gas line?
- How often do you repair Whirlpool dryers, and do you carry common parts on the truck?
Whirlpool Dryer Repair FAQs: Marble Falls, TX
What makes a dryer stop heating?
Why do my clothes come out damp?
Is this Whirlpool customer service?
More Laundry Repair in Marble Falls, TX
Whirlpool Dryer Repair in Nearby Cities
Write down any error code your Whirlpool dryer shows and when it appears. It helps a Marble Falls technician bring the right parts.