A Amana dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. The Danbury list starts with companies that name Amana, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Amana. If your dryer is still under manufacturer coverage, contact Amana directly.
Amana Dryer Repair Near Danbury
Our data shows 40 appliance repair companies inside a 30-mile radius of Danbury. 5 list an address in Danbury, and the rest are spread across Shelton (6), Norwalk (5), and Bridgeport (4). The closest is Sears Appliance Repair, about 1.6 miles away. None of the repair companies near Danbury name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Rated companies nearby average 4.3 stars across 32 businesses.
Companies are shown by relevance and distance from Danbury. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Mention Amana | 0 |
|---|---|
| Companies within 30 miles | 60 |
| Distance to the three closest (mi) | 1.6, 1.7, 1.7 |
| With 4.5+ stars and at least 10 reviews | 20 |
| Open on Saturdays (per listing) | 38 |
| Show laundry appliance work | 12 |
At the top of the Danbury list: Sears Appliance Repair (1.6 miles away, 4.6 stars from 215 reviews, lists Saturday hours); Sub-Zero and Viking appliance repair (1.7 miles away, 4.6 stars from 55 reviews, lists Saturday hours); Mr. Appliance of Fairfield CT (19.7 miles away, based in Stamford, 4.9 stars from 1,199 reviews, lists Saturday hours); Sultan Appliance Repair (13.9 miles away, based in Mahopac, 4.9 stars from 66 reviews, lists Saturday hours).
Know Your Amana Dryer
What a Amana Dryer Technician Deals With
The dryer needs a room temperature above 45°F to dry properly, and closet installs need adequate ventilation. Source: Amana - Electronic Dryer Use and Care Guide
What Amana Says to Check First
- Dryer making noise. Amana says a thump after sitting unused usually fades, then to check the drum edges for coins or buttons and make sure all four legs are installed and the dryer is level. Source: Amana - Electronic Dryer Use and Care Guide
- Dryer won't start. Amana says to press and hold Start for two to five seconds first, then check the fuses or breakers, the door latch, the cycle selection and whether the controls are locked. Source: Amana Product Help - Dryer Not Starting or No Operation
When to Call for Amana Dryer Repair
- Dryer shuts off a few minutes into the cycle
- Drum will not turn even though you hear a hum
- Cycles take two or three runs to finish
What Gets Fixed on a Danbury Dryer Call
Keeping a Amana Dryer Running
- Have a qualified technician remove lint from inside the dryer cabinet every two years, or more often with heavy use. Source: Amana - Electronic Dryer Use and Care Guide
- Clean the lint screen before every load and never run the dryer with a loose, damaged, blocked or missing screen. Source: Amana - Electronic Dryer Use and Care Guide
Budgeting for a Amana Dryer Repair
Most Amana dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Amana Dryer Call
- Any error code on the display
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- How long the vent run is and where it exits the house
Around Danbury
Most dryer calls in Danbury come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Connecticut's Department of Consumer Protection does not list a separate appliance repair license; work on gas piping, approved gas appliances and refrigeration systems falls under its heating, piping and cooling license categories. Source: Heating Piping and Cooling License Types and Scope of Work (CT Department of Consumer Protection)
Installing, repairing and maintaining gas piping and approved gas appliances requires a state heating, piping and cooling license (such as the G-1/G-2 gas license or a broader B, D or S license) issued through the Department of Consumer Protection. Source: Heating Piping and Cooling License Types and Scope of Work (CT Department of Consumer Protection)
Before You Book in Danbury
- What guarantee do you give on parts and labor?
- Do you work on gas dryers, and who handles anything involving the gas line?
- What is the service call or diagnostic fee, and is it applied to the repair?
Amana Dryer Repair FAQs: Danbury, CT
Why does my dryer take so long to dry?
Is my Amana dryer worth repairing?
Do you work for Amana?
Related Repair Pages for Danbury
Amana Dryer Repair Near Danbury
Before you call, find the model and serial number on your Amana dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.