Amana owners in Cloverly usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Cloverly, with those that mention Amana first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with Amana. Listed companies are independent technicians who repair Amana dryers and other brands.
Who Works on Amana Dryers Near Cloverly
40 repair companies serve Cloverly from within 30 miles. The rest are spread across Silver Spring (12), Rockville (6), and Kensington (4). The farthest listed company is about 8 miles out. None of the repair companies near Cloverly name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The closest is Local Appliance Repair Service Spencerville, about 1.2 miles away. Rated companies nearby average 4.6 stars across 35 businesses.
Companies are shown by relevance and distance from Cloverly. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Three nearest companies, miles away | 1.2, 1.7, 2.6 |
|---|---|
| Show laundry appliance work | 7 |
| Mention Amana | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 12 |
| Repair companies inside 30 miles | 60 |
| Open on Saturdays (per listing) | 42 |
Closest matches for Cloverly: TruFix Appliance Repair & Services, LLC (2.6 miles away, based in Silver Spring, 4.8 stars from 240 reviews, lists Saturday hours); Dexterous Appliance Repair (5.1 miles away, based in Fulton, 4.9 stars from 319 reviews); Bettar Appliance Master (6.7 miles away, based in Kensington, 4.4 stars from 140 reviews); Zapata’s HVAC Systems (1.7 miles away, based in Silver Spring, 4.9 stars from 122 reviews, lists Saturday hours).
Know Your Amana Dryer
How Amana Dryers Are Built
Amana calls for a rigid 4-inch metal exhaust vent kept as short as possible with no more than four 90-degree elbows, and says plastic or foil vent should be replaced. Source: Amana - Electronic Dryer Use and Care Guide
Common Amana Dryer Problems
- Dryer won't start. Amana says to press and hold Start for two to five seconds first, then check the fuses or breakers, the door latch, the cycle selection and whether the controls are locked. Source: Amana Product Help - Dryer Not Starting or No Operation
- Cycle ends too soon. Amana says the load may not be touching the sensor strips, so level the dryer and use Timed Dry or a different dryness level for very small loads. Source: Amana - Electronic Dryer Use and Care Guide
Signs Your Amana Dryer Needs a Technician
- Drum turns but the air stays cool
- Dryer shuts off a few minutes into the cycle
- Outside of the cabinet gets unusually hot
How a Dryer Service Call Usually Goes in Cloverly
Owner Care for Amana Dryers
- Clean the full vent run, including the exhaust hood, at least every two years, or sooner if drying slows down. Source: Amana - Electronic Dryer Use and Care Guide
- Have a qualified technician remove lint from inside the dryer cabinet every two years, or more often with heavy use. Source: Amana - Electronic Dryer Use and Care Guide
Budgeting for a Amana Dryer Repair
A Amana dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
Dryer Notes for Cloverly, MD
Most dryer calls in Cloverly come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)
In Maryland, you can check a license with the Maryland Department of Labor occupational license search (Board of Plumbing) or report a problem to the Maryland Attorney General, Consumer Protection Division.
Before You Book in Cloverly
- What guarantee do you give on parts and labor?
- Can you give a written estimate before ordering parts?
- Is your company licensed where my state requires it, and insured?
Amana Dryer Repair FAQs: Cloverly, MD
Is this Amana customer service?
Why do my clothes come out damp?
What should I do about a Amana error code?
Other Dryer Repair in Cloverly
More Amana Dryer Repair Pages Nearby
Nearby Towns Served From Cloverly
Amana dryer repair for Ashton-Sandy Spring is handled by the same companies listed for Cloverly. Each town also has its own dryer repair page with the nearest companies:
Write down any error code your Amana dryer shows and when it appears. It helps a Cloverly technician bring the right parts.