A Amana dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. The Columbia list starts with companies that name Amana, followed by other appliance repair companies that list dryer work.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Independent Amana Dryer Technicians, Columbia MD
Our data shows 40 appliance repair companies inside a 30-mile radius of Columbia. 6 list an address in Columbia, and the rest are spread across Laurel (6), Silver Spring (4), and Burtonsville (3). Nearest on the list: The Fix in The Mall in Columbia, around 1.0 miles out. No company within 90 miles of Columbia mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 35 rated companies, the average public rating is 4.6 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 20 |
|---|---|
| List dryer or washer & dryer work | 9 |
| Open on Saturdays (per listing) | 42 |
| Mention Amana | 0 |
| Distance to the three closest (mi) | 1.0, 1.2, 1.5 |
| Appliance repair companies in range (30 mi) | 60 |
Closest matches for Columbia: Mr. Appliance of Howard County (5.6 miles away, based in Ellicott City, 4.7 stars from 1,049 reviews, lists Saturday hours); Dexterous Appliance Repair (4.8 miles away, based in Fulton, 4.9 stars from 319 reviews); The Fix in The Mall in Columbia (1.0 miles away, 4.8 stars from 820 reviews, lists Saturday hours); Landers Appliance (1.2 miles away, 5.0 stars from 6 reviews).
Know Your Amana Dryer
How Amana Dryers Are Built
Amana calls for a rigid 4-inch metal exhaust vent kept as short as possible with no more than four 90-degree elbows, and says plastic or foil vent should be replaced. Source: Amana - Electronic Dryer Use and Care Guide
Common Amana Dryer Problems
- Dryer not heating. Amana says to check both 30-amp breakers and the 240-volt supply on electric models, or that the gas shutoff valve is open on gas models, and make sure an air-only cycle isn't selected. Source: Amana Product Help - Dryer is Not Heating
- Dryer not tumbling. Amana says to confirm the dryer has power, that Start was held for a few seconds with dry hands, and that the power cord is installed correctly. Source: Amana Product Help - Not Tumbling or Spinning - Dryer
Signs Your Amana Dryer Needs a Technician
- Squealing, thumping or grinding while it runs
- Dryer will not start when you press Start
- Drum will not turn even though you hear a hum
How a Dryer Service Call Usually Goes in Columbia
Care Amana Recommends for Its Dryers
- Have a qualified technician remove lint from inside the dryer cabinet every two years, or more often with heavy use. Source: Amana - Electronic Dryer Use and Care Guide
- Every six months, or sooner if lint falls off during use, wash the lint screen with hot water, liquid detergent and a nylon brush to remove residue. Source: Amana - Electronic Dryer Use and Care Guide
Amana Dryer Repair Cost Ranges
Price the repair before replacing a Amana dryer. Published ranges for common jobs:
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- How long the vent run is and where it exits the house
- The brand, model and serial number from the label inside the door or on the back panel
- Any error code on the display
What Columbia Owners Should Know
Most dryer calls in Columbia come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)
The Maryland Board of Plumbing issues master, journey and apprentice natural gas fitter licenses and a propane gas fitter certificate, and recognizes certain Baltimore County and WSSC gas fitter licenses. Source: Md. Code, Business Occupations and Professions § 12-302 (Maryland General Assembly)
Before You Book in Columbia
- What guarantee do you give on parts and labor?
- Will you check the vent and lint path as part of the visit?
- Is your company licensed where my state requires it, and insured?
Amana Dryer Repair FAQs: Columbia, MD
What should I do about a Amana error code?
Should I repair or replace my Amana dryer?
Which Columbia technicians work on Amana?
Other Dryer Repair in Columbia
Amana Dryer Repair Near Columbia
Before you call, find the model and serial number on your Amana dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.