Most Amana dryer repairs in Billings involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Billings, with those that mention Amana first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with Amana. Listed companies are independent technicians who repair Amana dryers and other brands.
Who Works on Amana Dryers Near Billings
Within 60 miles of Billings there are 11 appliance repair companies in our data. 11 of them are based in Billings itself. Distances run up to about 5 miles. No company within 90 miles of Billings mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Sears Appliance Repair, around 0.3 miles out. Across 11 rated companies, the average public rating is 4.2 stars. Billings is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| List dryer or washer & dryer work | 3 |
|---|---|
| Distance to the three closest (mi) | 0.3, 1.0, 1.2 |
| Rated 4.5 stars or higher (10+ reviews) | 3 |
| Appliance repair companies in range (60 mi) | 11 |
| Mention Amana | 0 |
| Open on Saturdays (per listing) | 4 |
Closest matches for Billings: Big Sky Appliance Repair (3.0 miles away, 4.9 stars from 105 reviews); Fred's Appliance (2.6 miles away, 4.4 stars from 739 reviews, lists Saturday hours); Sears Appliance Repair (0.3 miles away, 1.0 stars from 3 reviews, lists Saturday hours); Waynes appliance repair corp (1.2 miles away, 5.0 stars from 55 reviews).
Amana Dryer Features Technicians Work On
What a Amana Dryer Technician Deals With
Electric Amana dryers run on a 240-volt supply with two 30-amp breakers, one for the motor and one for the heating element, so a single tripped breaker can stop heating. Source: Amana Product Help - Dryer is Not Heating
What Amana Says to Check First
- Clothes take too long to dry. Amana points to a dirty lint screen, overloading, a No Heat setting, or a vent that is clogged, crushed, kinked, too long or has too many turns. Source: Amana - Electronic Dryer Use and Care Guide
- Dryer not heating. Amana says to check both 30-amp breakers and the 240-volt supply on electric models, or that the gas shutoff valve is open on gas models, and make sure an air-only cycle isn't selected. Source: Amana Product Help - Dryer is Not Heating
When to Call for Amana Dryer Repair
- Drum will not turn even though you hear a hum
- Squealing, thumping or grinding while it runs
- Cycles take two or three runs to finish
Inside a Dryer Repair Visit
Care Amana Recommends for Its Dryers
- Have a qualified technician remove lint from inside the dryer cabinet every two years, or more often with heavy use. Source: Amana - Electronic Dryer Use and Care Guide
- Every six months, or sooner if lint falls off during use, wash the lint screen with hot water, liquid detergent and a nylon brush to remove residue. Source: Amana - Electronic Dryer Use and Care Guide
What Amana Dryer Repairs Cost
A Amana dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Any error code on the display
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
What Billings Owners Should Know
Most dryer calls in Billings come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Montana's plumber licensing law does not cover fuel gas piping; gas piping and gas appliance installations are handled through mechanical permits and inspections by the state Building Codes Program or certified local governments, under the International Fuel Gas Code. Source: Montana DLI Building Codes: Mechanical Permits
In Montana, you can check a license with the Montana DLI Construction Contractor Registration Lookup or report a problem to the Montana Department of Justice, Office of Consumer Protection.
Before You Book in Billings
- Is your company licensed where my state requires it, and insured?
- Will you check the vent and lint path as part of the visit?
- Can you look at the washer on the same visit if it is acting up too?
Amana Dryer Repair FAQs: Billings, MT
Do you work for Amana?
What makes a dryer stop heating?
Which Billings technicians work on Amana?
Why do my clothes come out damp?
More Laundry Repair in Billings, MT
More Amana Dryer Repair Pages Nearby
Also Serving Towns Around Billings
Amana dryer repair for Lockwood, Laurel, and Miles City is handled by the same companies listed for Billings. Each town also has its own dryer repair page with the nearest companies:
Before you call, find the model and serial number on your Amana dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.