Most Amana dryer repairs in Havre involve the same few systems: heat, airflow, the drum drive and the controls. The Havre list starts with companies that name Amana, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with Amana. Listed companies are independent technicians who repair Amana dryers and other brands.
Amana Dryer Repair Near Havre
6 repair companies serve Havre from within 169 miles. 1 of them are based in Havre itself, and the rest are spread across Great Falls (3), Lewistown (1), and Helena (1). No company within 90 miles of Havre mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Sears Appliance Repair, about 2.5 miles away. Rated companies nearby average 4.5 stars across 5 businesses. Havre is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| List dryer or washer & dryer work | 2 |
|---|---|
| Open on Saturdays (per listing) | 4 |
| Three nearest companies, miles away | 2.5, 102.3, 102.8 |
| Appliance repair companies in range (169 mi) | 6 |
| Rated 4.5 stars or higher (10+ reviews) | 3 |
| Mention Amana | 0 |
At the top of the Havre list: Sears Appliance Repair (2.5 miles away, lists Saturday hours); Appliance Doctor (103.2 miles away, based in Great Falls, 5.0 stars from 432 reviews); Sears Appliance Repair (103.9 miles away, based in Great Falls, 5.0 stars from 1 reviews, lists Saturday hours); Affordable Appliance Repair (102.8 miles away, based in Great Falls, 4.6 stars from 60 reviews, lists Saturday hours).
Know Your Amana Dryer
How Amana Dryers Are Built
Electric Amana dryers run on a 240-volt supply with two 30-amp breakers, one for the motor and one for the heating element, so a single tripped breaker can stop heating. Source: Amana Product Help - Dryer is Not Heating
Common Amana Dryer Problems
- Cycle ends too soon. Amana says the load may not be touching the sensor strips, so level the dryer and use Timed Dry or a different dryness level for very small loads. Source: Amana - Electronic Dryer Use and Care Guide
- Dryer not tumbling. Amana says to confirm the dryer has power, that Start was held for a few seconds with dry hands, and that the power cord is installed correctly. Source: Amana Product Help - Not Tumbling or Spinning - Dryer
Signs Your Amana Dryer Needs a Technician
- Drum will not turn even though you hear a hum
- Dryer shuts off a few minutes into the cycle
- Clothes still damp after a full cycle
What Gets Fixed on a Havre Dryer Call
Care Amana Recommends for Its Dryers
- Every six months, or sooner if lint falls off during use, wash the lint screen with hot water, liquid detergent and a nylon brush to remove residue. Source: Amana - Electronic Dryer Use and Care Guide
- Have a qualified technician remove lint from inside the dryer cabinet every two years, or more often with heavy use. Source: Amana - Electronic Dryer Use and Care Guide
Budgeting for a Amana Dryer Repair
Price the repair before replacing a Amana dryer. Published ranges for common jobs:
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- How long the vent run is and where it exits the house
- Any error code on the display
Local Notes for Havre
Most dryer calls in Havre come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Montana's plumber licensing law does not cover fuel gas piping; gas piping and gas appliance installations are handled through mechanical permits and inspections by the state Building Codes Program or certified local governments, under the International Fuel Gas Code. Source: Montana DLI Building Codes: Mechanical Permits
In Montana, you can check a license with the Montana DLI Construction Contractor Registration Lookup or report a problem to the Montana Department of Justice, Office of Consumer Protection.
Questions to Ask a Havre Technician
- Do you work on gas dryers, and who handles anything involving the gas line?
- How often do you repair Amana dryers, and do you carry common parts on the truck?
- Is your company licensed where my state requires it, and insured?
Amana Dryer Repair FAQs: Havre, MT
Which Havre technicians work on Amana?
Is this Amana customer service?
Why does my Amana dryer show an error code?
Other Dryer Repair in Havre
More Amana Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Amana repair.