Amana owners in Santa Fe usually want two things from a repair company: experience with the brand and quick access to parts. The Santa Fe list starts with companies that name Amana, followed by other appliance repair companies that list dryer work.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Amana Dryers Near Santa Fe
Our data shows 20 appliance repair companies inside a 60-mile radius of Santa Fe. Other nearby bases include Albuquerque (12), Edgewood (2), and Ranchos De Taos (2). The farthest listed company is about 54 miles out. None of the repair companies near Santa Fe name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Al's Appliance Center is the nearest, roughly 39.1 miles from Santa Fe. The 17 rated companies in range average 4.5 stars. Santa Fe is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Listing Saturday hours | 14 |
|---|---|
| Mention Amana | 0 |
| With 4.5+ stars and at least 10 reviews | 10 |
| Appliance repair companies in range (60 mi) | 20 |
| Distance to the three closest (mi) | 39.1, 42.8, 43.9 |
| Show laundry appliance work | 7 |
First up for Santa Fe: ASAP Appliance Repair (47.7 miles away, based in Albuquerque, 4.9 stars from 657 reviews, lists Saturday hours); Sarah's Appliance Repair LLC (52.4 miles away, based in Albuquerque, 4.9 stars from 566 reviews, lists Saturday hours); Sears Appliance Repair (50.7 miles away, based in Albuquerque, 4.4 stars from 368 reviews, lists Saturday hours); Mr. Ed's Appliance Repair (50.0 miles away, based in Albuquerque, 4.8 stars from 136 reviews).
Amana Dryer Lines and Features
How Amana Dryers Are Built
Electric Amana dryers run on a 240-volt supply with two 30-amp breakers, one for the motor and one for the heating element, so a single tripped breaker can stop heating. Source: Amana Product Help - Dryer is Not Heating
Common Amana Dryer Problems
- Dryer not heating. Amana says to check both 30-amp breakers and the 240-volt supply on electric models, or that the gas shutoff valve is open on gas models, and make sure an air-only cycle isn't selected. Source: Amana Product Help - Dryer is Not Heating
- Dryer not tumbling. Amana says to confirm the dryer has power, that Start was held for a few seconds with dry hands, and that the power cord is installed correctly. Source: Amana Product Help - Not Tumbling or Spinning - Dryer
Amana Dryer Problems Worth a Service Call
- Dryer will not start when you press Start
- Squealing, thumping or grinding while it runs
- Burning or hot smell during a cycle
What a Dryer Repair Technician Checks
Owner Care for Amana Dryers
- Clean the full vent run, including the exhaust hood, at least every two years, or sooner if drying slows down. Source: Amana - Electronic Dryer Use and Care Guide
- Every six months, or sooner if lint falls off during use, wash the lint screen with hot water, liquid detergent and a nylon brush to remove residue. Source: Amana - Electronic Dryer Use and Care Guide
Amana Dryer Repair Cost Ranges
Most Amana dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Whether the dryer is gas or electric
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- How long the vent run is and where it exits the house
Dryer Notes for Santa Fe, NM
Most dryer calls in Santa Fe come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
New Mexico has no appliance-repair-only license; installing, repairing and servicing natural gas piping and listed gas appliances falls under the Construction Industries Division's MM-2 natural gas fitting classification. Source: CID License Classifications and Scopes (City of Albuquerque)
Natural gas piping and gas appliance work needs a Construction Industries Division MM-2 (natural gas fitting) or MM-98 (mechanical) license, with journeyman gas fitter certification for workers; the plumbing-only MM-1 class excludes gas appliances and gas piping, and LP gas systems fall under a separate LP gas classification. Source: CID License Classifications and Scopes (City of Albuquerque)
Questions to Ask a Santa Fe Technician
- Will you check the vent and lint path as part of the visit?
- Is your company licensed where my state requires it, and insured?
- How often do you repair Amana dryers, and do you carry common parts on the truck?
Amana Dryer Repair FAQs: Santa Fe, NM
Do you work for Amana?
Why do my clothes come out damp?
Why does my Amana dryer show an error code?
More Laundry Repair in Santa Fe, NM
More Amana Dryer Repair Pages Nearby
Nearby Towns Served From Santa Fe
Live outside Santa Fe? The same Amana dryer repair technicians serve Eldorado at Santa Fe. See each town's own dryer repair listings below.
Before you call, find the model and serial number on your Amana dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.