A Electrolux dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. The St. Ann list starts with companies that name Electrolux, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Electrolux. If your dryer is still under manufacturer coverage, contact Electrolux directly.
Independent Electrolux Dryer Technicians, St. Ann MO
40 repair companies serve St. Ann from within 30 miles. Other nearby bases include St. Louis (19), Florissant (4), and Hazelwood (3). Nearest on the list: Old School Appliance Repair, around 1.1 miles out. No company within 90 miles of St. Ann mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.1 stars across 29 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Listing Saturday hours | 42 |
|---|---|
| Show laundry appliance work | 14 |
| Companies within 30 miles | 60 |
| With 4.5+ stars and at least 10 reviews | 17 |
| Mention Electrolux | 0 |
| Three nearest companies, miles away | 1.1, 2.1, 2.1 |
The leading options for St. Ann are P.A.C.E. Appliance Repair (7.9 miles away, based in St Charles, 4.9 stars from 423 reviews); Mr. Appliance of Greater St. Louis (10.5 miles away, based in Ballwin, 4.8 stars from 1,345 reviews, lists Saturday hours); All American Appliance and HVAC Services (4.7 miles away, based in St. Louis, 4.7 stars from 2,771 reviews, lists Saturday hours); Hoffmann Brothers (3.2 miles away, based in St. Louis, 4.9 stars from 6,545 reviews, lists Saturday hours).
Know Your Electrolux Dryer
What a Electrolux Dryer Technician Deals With
Electrolux dryers display EF1 for a ventilation blockage and E 4 for a failed humidity sensor, and on E 4 manual timed cycles still work. Source: Electrolux - Laundry Dryer Error Code Guide
An electric Electrolux dryer is fed by two house circuits, so if one breaker trips or fuse blows the drum still turns but the heater does not work. Source: Electrolux - My dryer is running, but does not seem to be heating. What should I do?
What Electrolux Says to Check First
- Clothes over-dried. Electrolux recommends choosing the right cycle and temperature and using Auto Dry rather than Timed Dry. Source: Electrolux - My clothes seem to be over-dried. How can I prevent this?
- Dryer takes too long to dry. Electrolux points first to a clean lint screen, the right heat setting, proper load size, clean moisture sensor bars, and a clear exhaust duct and hood. Source: Electrolux - Dryer - Not Drying and Extended Drying Time
What Electrolux Dryer Codes Mean
| Code | What it means |
|---|---|
| H4 / B4 | Incorrect wiring at installation. Source: Electrolux - Laundry Dryer Error Code Guide |
| EF1 | Ventilation blockage; check the lint filter, exhaust duct and vent exit for lint or debris. Source: Electrolux - Laundry Dryer Error Code Guide |
| H2 / B2 | A problem with the household power supply. Source: Electrolux - Laundry Dryer Error Code Guide |
Signs Your Electrolux Dryer Needs a Technician
- Drum will not turn even though you hear a hum
- Burning or hot smell during a cycle
- Cycles take two or three runs to finish
What a Dryer Repair Technician Checks
Keeping a Electrolux Dryer Running
- Inspect and clean the entire outdoor exhaust and venting system every 18 months. Source: Electrolux - Dryers - How often do I need to clean my dryer or the lint screen/filter?
- Wipe the moisture sensor bars with rubbing alcohol to remove fabric softener sheet residue. Source: Electrolux - Dryer - Not Drying and Extended Drying Time
Budgeting for a Electrolux Dryer Repair
Most Electrolux dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Any error code on the display
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
Around St. Ann
Most dryer calls in St. Ann come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Gas appliance and mechanical trade credentials are issued by local governments; Kansas City, for example, certifies gas-fired appliance supervisors, mechanical supervisors and master pipe fitters. Source: KCMO BizCare: Contractor Licensing
In Missouri, you can report a problem to the Missouri Attorney General's Office, Consumer Protection.
Before You Book in St. Ann
- Will you check the vent and lint path as part of the visit?
- What is the service call or diagnostic fee, and is it applied to the repair?
- How often do you repair Electrolux dryers, and do you carry common parts on the truck?
Electrolux Dryer Repair FAQs: St. Ann, MO
How do I find a technician who knows Electrolux dryers?
What makes a dryer stop heating?
Why does my Electrolux dryer show an error code?
Related Repair Pages for St. Ann
Electrolux Dryer Repair in Nearby Cities
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.