GE owners in Cherry Hills Village usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Cherry Hills Village, with those that mention GE first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
GE Dryer Repair Near Cherry Hills Village
40 repair companies serve Cherry Hills Village from within 30 miles. The rest are spread across Denver (11), Englewood (7), and Littleton (7). Distances run up to about 6 miles. None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. The closest is Appliance Repair Technologies Englewood, about 2.2 miles away. Rated companies nearby average 4.7 stars across 37 businesses.
Companies are shown by relevance and distance from Cherry Hills Village. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Show laundry appliance work | 13 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 23 |
| Three nearest companies, miles away | 2.2, 2.2, 2.4 |
| Listing Saturday hours | 40 |
| Repair companies inside 30 miles | 60 |
| Mention GE | 0 |
At the top of the Cherry Hills Village list: GE Monogram Repair Expert (16.0 miles away, based in Castle Rock, 4.9 stars from 91 reviews, lists Saturday hours); Mr. Appliance of Denver (4.7 miles away, based in Denver, 4.8 stars from 2,260 reviews, lists Saturday hours); Wilson & Myers (5.1 miles away, based in Denver, 4.9 stars from 1,412 reviews, lists Saturday hours); Mr. Appliance of Aurora (4.9 miles away, based in Aurora, 4.8 stars from 737 reviews).
Know Your GE Dryer
How GE Dryers Are Built
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
What GE Says to Check First
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Dryer shuts off a few minutes into the cycle
- Clothes still damp after a full cycle
- Outside of the cabinet gets unusually hot
What a Dryer Repair Technician Checks
Care GE Recommends for Its Dryers
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Whether the dryer is gas or electric
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
Dryer Notes for Cherry Hills Village, CO
Most dryer calls in Cherry Hills Village come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Colorado's Division of Professions and Occupations has no appliance repair license; its trade licenses cover plumbing and electrical work. Source: Occupational Professions (Colorado DORA Division of Professions and Occupations)
State law treats fuel gas piping separately from plumbing and has the State Plumbing Board adopt a Colorado fuel gas code for inspecting gas piping installations; hooking a gas appliance to an existing service connection falls outside the statute's definition of gas piping. Source: Colorado Revised Statutes Title 12, ยงยง 12-155-103 and 12-155-106 (Colorado General Assembly)
Questions to Ask a Cherry Hills Village Technician
- Can you give a written estimate before ordering parts?
- What guarantee do you give on parts and labor?
- How often do you repair GE dryers, and do you carry common parts on the truck?
GE Dryer Repair FAQs: Cherry Hills Village, CO
Is my GE dryer worth repairing?
What makes a dryer stop heating?
Is this GE customer service?
More Laundry Repair in Cherry Hills Village, CO
More GE Dryer Repair Pages Nearby
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.