GE owners in Fern Park usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Fern Park, with those that mention GE first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Who Works on GE Dryers Near Fern Park
We found 40 appliance repair companies within 30 miles of Fern Park. 1 of them are based in Fern Park itself, and the rest are spread across Orlando (13), Winter Park (7), and Altamonte Springs (4). The farthest listed company is about 8 miles out. Nearest on the list: Fern Park Appliance Repair, around 0.4 miles out. No company within 30 miles of Fern Park names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. The 32 rated companies in range average 4.3 stars.
Companies are shown by relevance and distance from Fern Park. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Distance to the three closest (mi) | 0.4, 1.3, 1.6 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 23 |
| Listing Saturday hours | 45 |
| Mention GE | 0 |
| Repair companies inside 30 miles | 60 |
| Show laundry appliance work | 22 |
Closest matches for Fern Park: Sears Appliance Repair (76.6 miles away, based in Temple Terrace, 4.6 stars from 131 reviews, lists Saturday hours); Hartman's Appliance Repair (6.4 miles away, based in Orlando, 4.8 stars from 982 reviews, lists Saturday hours); Mr. Appliance of Orlando (3.7 miles away, based in Winter Park, 4.5 stars from 727 reviews, lists Saturday hours); Reliable Appliance Repair Longwood (4.6 miles away, based in Longwood, 4.9 stars from 171 reviews, lists Saturday hours).
GE Dryer Features Technicians Work On
How GE Dryers Are Built
An electric GE dryer receiving only partial (120V) power from its 240V circuit can tumble normally but produce no heat, and a dryer wired to a 120V circuit can take up to three times longer to dry. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
GE Dryer Symptoms and First Checks
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Drum will not turn even though you hear a hum
- Clothes still damp after a full cycle
- Dryer will not start when you press Start
How a Dryer Service Call Usually Goes in Fern Park
Keeping a GE Dryer Running
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- The brand, model and serial number from the label inside the door or on the back panel
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
Dryer Notes for Fern Park, FL
Most dryer calls in Fern Park come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Florida's construction licensing guidance says that paid work such as installing a dishwasher connected to drinking water or replacing a water heater requires a licensed contractor, and that a local business tax receipt or certificate of competency may also apply; it does not describe a separate state appliance repair license. Source: DBPR License Requirements and Exemptions (Construction Industry Licensing Board), posted by Columbia County
LP gas businesses are licensed by the Florida Department of Agriculture and Consumer Services; its Category V LP gas installer license covers installing and servicing LP gas appliances, piping and equipment. Source: Florida Statutes Chapter 527, Sale of Liquefied Petroleum Gas
Questions to Ask a Fern Park Technician
- If a part has to be ordered, how soon can you come back to finish?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Can you give a written estimate before ordering parts?
GE Dryer Repair FAQs: Fern Park, FL
Which Fern Park technicians work on GE?
Why does my GE dryer show an error code?
Why do my clothes come out damp?
Related Repair Pages for Fern Park
GE Dryer Repair in Nearby Cities
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.