Most GE dryer repairs in Clive involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Clive, with those that mention GE first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
Who Works on GE Dryers Near Clive
Our data shows 28 appliance repair companies inside a 30-mile radius of Clive. 1 of them are based in Clive itself, and other nearby bases include Des Moines (11), Urbandale (5), and West Des Moines (3). No company within 30 miles of Clive names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. The closest is Brookfield Appliance Repair Services, about 1.0 miles away. Across 27 rated companies, the average public rating is 4.4 stars.
Companies are shown by relevance and distance from Clive. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| List dryer or washer & dryer work | 7 |
|---|---|
| Distance to the three closest (mi) | 1.0, 1.3, 2.3 |
| Mention GE | 0 |
| With 4.5+ stars and at least 10 reviews | 5 |
| Repair companies inside 30 miles | 28 |
| Open on Saturdays (per listing) | 22 |
Closest matches for Clive: Sears Appliance Repair (63.8 miles away, based in Carroll, 4.8 stars from 25 reviews, lists Saturday hours); Warners' Stellian Appliance (3.0 miles away, based in West Des Moines, 4.8 stars from 1,395 reviews, lists Saturday hours); Westside Appliance Repair (2.3 miles away, based in Urbandale, 4.6 stars from 774 reviews); Sears Appliance Repair (4.0 miles away, based in Urbandale, 4.0 stars from 52 reviews, lists Saturday hours).
GE Dryer Lines and Features
How GE Dryers Are Built
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE allows only rigid or flexible metal vent duct and says plastic flexible duct is not acceptable because it collapses, cuts airflow and can collect water. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Common GE Dryer Problems
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Clothes still damp after a full cycle
- Squealing, thumping or grinding while it runs
- Drum turns but the air stays cool
Inside a Dryer Repair Visit
Keeping a GE Dryer Running
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- The brand, model and serial number from the label inside the door or on the back panel
- Whether the dryer is gas or electric
- Any error code on the display
Local Notes for Clive
Most dryer calls in Clive come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Iowa does not issue a general appliance repair technician license; the Plumbing and Mechanical Systems Board licenses plumbing, HVAC, refrigeration and hydronic work, and state law carves out a special restricted license only for utility employees who repair appliances. Source: Iowa Code Chapter 105, Plumbers, Mechanical Professionals, and Contractors
Fuel gas piping falls within Iowa's statutory definition of plumbing, and gas lines tied to HVAC, hydronic and refrigeration systems are covered by those mechanical licenses, all issued by the state Plumbing and Mechanical Systems Board; people qualified under liquefied petroleum gas rules may work on propane equipment and its piping. Source: Iowa Code Chapter 105, Plumbers, Mechanical Professionals, and Contractors
Questions to Ask a Clive Technician
- Will you check the vent and lint path as part of the visit?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Can you give a written estimate before ordering parts?
GE Dryer Repair FAQs: Clive, IA
Is this GE customer service?
Should I repair or replace my GE dryer?
Which Clive technicians work on GE?
Other Dryer Repair in Clive
GE Dryer Repair Near Clive
Write down any error code your GE dryer shows and when it appears. It helps a Clive technician bring the right parts.