Serving Ames, Iowa and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

GE Dryer Repair in Ames, IA

A local list of independent GE dryer technicians for Ames and the Story County area, plus a helpline that connects you with one.

Talk to a GE dryer tech in Ames
Tell us the model and the problem and we will connect you with a local technician.
☎(888) 772-9805
✓10 companies listed for Ames✓Independent, not a manufacturer✓Public ratings & distances

Most GE dryer repairs in Ames involve the same few systems: heat, airflow, the drum drive and the controls. The Ames list starts with companies that name GE, followed by other appliance repair companies that list dryer work.

This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.

Independent GE Dryer Technicians, Ames IA

Within 30 miles of Ames there are 18 appliance repair companies in our data. 1 list an address in Ames, and the rest are spread across Des Moines (8), Urbandale (5), and Ankeny (2). None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Ken's Appliance & Services LLC is the nearest, roughly 0.5 miles from Ames. Across 18 rated companies, the average public rating is 4.6 stars.

Mentions GE
Sears Appliance Repair
715 US-30, Carroll, IA 51401
64.5 mi from Ames
★★★★★ 4.8 (25 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Ken's Appliance & Services LLC
230 Washington Ave, Ames, IA 50010
0.5 mi from Ames
★★★★ 4.0 (90 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Westside Appliance Repair
2877 99th St, Urbandale, IA 50322
28.9 mi from Ames
★★★★½ 4.6 (774 reviews)
DryersWashers
Washer & Dryer Repair
Sears Appliance Repair
7501 Hickman Rd, Urbandale, IA 50322
28.8 mi from Ames
★★★★ 4.0 (52 reviews)
DryersWashersSaturday hours
Appliance Repair
Greens Appliance, Heating & Cooling
3390 SE Crossroads Dr Ste 116, Grimes, IA 50111
26.4 mi from Ames
★★★★★ 4.9 (4,448 reviews)
Saturday hours
Washer & Dryer Repair
Sears Appliance Repair
4000 Merle Hay Rd, Des Moines, IA 50310
27.5 mi from Ames
★★★★ 4.2 (62 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
2535 Hubbell Ave, Des Moines, IA 50317
28.9 mi from Ames
★★★★½ 4.4 (117 reviews)
DryersWashersSaturday hours
Appliance Repair
Hometown Hero Appliance Repair
3940 NW Urbandale Dr, Urbandale, IA 50322
28.1 mi from Ames
★★★★★ 4.9 (889 reviews)
Appliance Repair
Metro Appliance Repair
2905 Delaware Ave, Des Moines, IA 50317
28.0 mi from Ames
★★★★½ 4.7 (613 reviews)
Saturday hours
Appliance Repair
Pioneer Appliance Repair Experts
1725 Hull Ave, Des Moines, IA 50313
28.0 mi from Ames
★★★★★ 5.0 (5 reviews)
Saturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Ames repair companies in numbers
Appliance repair companies in range (30 mi)18
Open on Saturdays (per listing)15
Distance to the three closest (mi)0.5, 20.5, 22.5
Mention GE0
List dryer or washer & dryer work5
Rated 4.5 stars or higher (10+ reviews)4

Closest matches for Ames: Sears Appliance Repair (64.5 miles away, based in Carroll, 4.8 stars from 25 reviews, lists Saturday hours); Ken's Appliance & Services LLC (0.5 miles away, 4.0 stars from 90 reviews, lists Saturday hours); Westside Appliance Repair (28.9 miles away, based in Urbandale, 4.6 stars from 774 reviews); Sears Appliance Repair (28.8 miles away, based in Urbandale, 4.0 stars from 52 reviews, lists Saturday hours).

⚡ Get connected with a GE dryer technician near Ames
☎(888) 772-9805

GE Dryer Lines and Features

GE Profile Smart Front Load Dryers with Steam and SanitizeLarge-capacity front-load dryers with steam, a sanitize cycle and SmartHQ app connectivity.
GE Profile UltraFast ComboAn all-in-one washer/dryer that dries with ventless inverter heat pump technology, so it needs no outside vent and runs on a 120V plug.

What Makes GE Dryer Repairs Different

GE allows only rigid or flexible metal vent duct and says plastic flexible duct is not acceptable because it collapses, cuts airflow and can collect water. Source: GE Appliances - Dryer - Things To Check For A Venting Issue

The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning

What GE Says to Check First

GE Dryer Error Codes

CodeWhat it means
353 (UltraFast Combo)The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages
18 (UltraFast Combo)The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages
Check and Clean Drain Pump Filter (UltraFast Combo)A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages

When to Call for GE Dryer Repair

  • Burning or hot smell during a cycle
  • Outside of the cabinet gets unusually hot
  • Clothes still damp after a full cycle

What a Dryer Repair Technician Checks

Igniter, valve coils and flame sensorGas dryers light the burner with a glowing igniter, open the gas valve with a set of coils and confirm the flame with a sensor. When the igniter glows but the burner never lights, the valve coils are a frequent culprit.
Airflow and the ventA long dry time is most often an airflow problem. A technician checks the lint screen housing, the duct behind the dryer and the exhaust hood outside before replacing any heating parts, because a restricted vent can make a healthy dryer look broken.

Keeping a GE Dryer Running

Brand guides: GE Dryer Not Heating: What to Check.

Budgeting for a GE Dryer Repair

Price the repair before replacing a GE dryer. Published ranges for common jobs:

A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

What to Have Ready for a GE Dryer Call

  • How long the vent run is and where it exits the house
  • The brand, model and serial number from the label inside the door or on the back panel
  • Whether the dryer is gas or electric

What Ames Owners Should Know

Most dryer calls in Ames come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Iowa does not issue a general appliance repair technician license; the Plumbing and Mechanical Systems Board licenses plumbing, HVAC, refrigeration and hydronic work, and state law carves out a special restricted license only for utility employees who repair appliances. Source: Iowa Code Chapter 105, Plumbers, Mechanical Professionals, and Contractors

In Iowa, you can check a license with the Iowa DIAL Find a Record or License (Plumbing & Mechanical Systems Board public search) or report a problem to the Iowa Attorney General Consumer Protection Division.

Questions to Ask a Ames Technician

  • Do you work on gas dryers, and who handles anything involving the gas line?
  • If a part has to be ordered, how soon can you come back to finish?
  • Is your company licensed where my state requires it, and insured?

GE Dryer Repair FAQs: Ames, IA

Why does my GE dryer show an error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a blocked vent. If the code returns, a technician can test the part the code points to.
Why is my dryer running but not heating?
On an electric dryer the usual suspects are the heating element, a blown thermal fuse, a failed thermostat or a tripped breaker on one leg of the circuit. On a gas dryer, check that the gas is on, then the igniter and valve coils. A blocked vent can trip the safety fuse on both types, so it should be cleared first.
Do you work for GE?
No. We are an independent directory and are not affiliated with GE. The companies listed are independent technicians. For manufacturer coverage questions, contact GE directly.

Related Repair Pages for Ames

GE Dryer Repair Near Ames

Write down any error code your GE dryer shows and when it appears. It helps a Ames technician bring the right parts.

Call to reach an independent GE dryer tech
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech