If your GE dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. The Waterloo list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
GE Dryer Repair Near Waterloo
40 repair companies serve Waterloo from within 60 miles. 4 list an address in Waterloo, and the rest are spread across Cedar Rapids (17), Marion (4), and Charles City (3). The farthest listed company is about 53 miles out. Nearest on the list: Checkmark Appliance Repair, around 0.8 miles out. Of those, 1 mentions GE by name. Rated companies nearby average 4.7 stars across 39 businesses. Waterloo is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Listing Saturday hours | 32 |
|---|---|
| Repair companies inside 60 miles | 44 |
| Show laundry appliance work | 9 |
| Mention GE | 1 |
| Distance to the three closest (mi) | 0.8, 1.7, 2.0 |
| With 4.5+ stars and at least 10 reviews | 12 |
First up for Waterloo: Appliance Plus (23.7 miles away, based in Independence, 5.0 stars from 82 reviews, lists Saturday hours); Sears Appliance Repair (2.6 miles away, 4.7 stars from 86 reviews, lists Saturday hours); Peoples Appliance Inc (1.7 miles away, 4.2 stars from 100 reviews, lists Saturday hours); Sears Appliance Repair (25.0 miles away, based in Oelwein, 4.8 stars from 4 reviews, lists Saturday hours).
Know Your GE Dryer
What Makes GE Dryer Repairs Different
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
What GE Says to Check First
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Burning or hot smell during a cycle
- Dryer will not start when you press Start
- Squealing, thumping or grinding while it runs
What Gets Fixed on a Waterloo Dryer Call
Care GE Recommends for Its Dryers
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- How long the vent run is and where it exits the house
- Whether the dryer is gas or electric
- Any error code on the display
Around Waterloo
Most dryer calls in Waterloo come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Iowa does not issue a general appliance repair technician license; the Plumbing and Mechanical Systems Board licenses plumbing, HVAC, refrigeration and hydronic work, and state law carves out a special restricted license only for utility employees who repair appliances. Source: Iowa Code Chapter 105, Plumbers, Mechanical Professionals, and Contractors
Fuel gas piping falls within Iowa's statutory definition of plumbing, and gas lines tied to HVAC, hydronic and refrigeration systems are covered by those mechanical licenses, all issued by the state Plumbing and Mechanical Systems Board; people qualified under liquefied petroleum gas rules may work on propane equipment and its piping. Source: Iowa Code Chapter 105, Plumbers, Mechanical Professionals, and Contractors
Questions to Ask a Waterloo Technician
- Can you give a written estimate before ordering parts?
- Do you work on gas dryers, and who handles anything involving the gas line?
- Is your company licensed where my state requires it, and insured?
GE Dryer Repair FAQs: Waterloo, IA
Which Waterloo technicians work on GE?
Should I repair or replace my GE dryer?
Do you work for GE?
Related Repair Pages for Waterloo
More GE Dryer Repair Pages Nearby
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.