If your GE dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
GE Dryer Repair Near Fort Campbell North
We found 13 appliance repair companies within 30 miles of Fort Campbell North. The rest are spread across Clarksville (9), Hopkinsville (2), and Ashland City (1). Distances run up to about 29 miles. The closest is Barnes Repair Company, about 6.5 miles away. None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Rated companies nearby average 4.7 stars across 12 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 8 |
|---|---|
| Show laundry appliance work | 3 |
| Mention GE | 0 |
| Open on Saturdays (per listing) | 6 |
| Three nearest companies, miles away | 6.5, 7.6, 7.6 |
| Repair companies inside 30 miles | 13 |
Closest matches for Fort Campbell North: Sears Appliance Repair (46.2 miles away, based in Madisonville, 4.4 stars from 67 reviews, lists Saturday hours); Sears Appliance Repair (88.3 miles away, based in Milan, 1.0 stars from 2 reviews, lists Saturday hours); Barnes Repair Company (6.5 miles away, based in Clarksville, 5.0 stars from 289 reviews); Mr. Appliance of Clarksville (7.6 miles away, based in Clarksville, 4.8 stars from 770 reviews, lists Saturday hours).
GE Dryer Features Technicians Work On
What a GE Dryer Technician Deals With
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
GE Dryer Symptoms and First Checks
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Clothes still damp after a full cycle
- Drum turns but the air stays cool
- Outside of the cabinet gets unusually hot
What a Dryer Repair Technician Checks
Care GE Recommends for Its Dryers
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- The brand, model and serial number from the label inside the door or on the back panel
- How long the vent run is and where it exits the house
- Whether the dryer is gas or electric
Dryer Notes for Fort Campbell North, KY
Most dryer calls in Fort Campbell North come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Kentucky has no license category for appliance repair as such; the Department of Housing, Buildings and Construction licenses trades such as HVAC (whose scope covers installing and repairing heating, burner and cooling systems), plumbing and electrical. Source: KRS 198B.650 Definitions (Kentucky Legislative Research Commission)
In Kentucky, you can check a license with the Department of Housing, Buildings and Construction License Search and Verification or report a problem to the Kentucky Attorney General, Office of Consumer Protection.
How to Choose a Dryer Technician Near Fort Campbell North
- Can you look at the washer on the same visit if it is acting up too?
- Can you give a written estimate before ordering parts?
- Will you check the vent and lint path as part of the visit?
GE Dryer Repair FAQs: Fort Campbell North, KY
Should I repair or replace my GE dryer?
Do you work for GE?
What makes a dryer stop heating?
More Laundry Repair in Fort Campbell North, KY
GE Dryer Repair Near Fort Campbell North
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.