A GE dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. Below are independent repair companies serving Linthicum, with those that mention GE first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
GE Dryer Repair Near Linthicum
We found 40 appliance repair companies within 30 miles of Linthicum. Other nearby bases include Baltimore (15), Columbia (6), and Glen Burnie (4). The farthest listed company is about 12 miles out. Bowman Appliances is the nearest, roughly 3.7 miles from Linthicum. None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. The 36 rated companies in range average 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Listing Saturday hours | 39 |
|---|---|
| Mention GE | 0 |
| Companies within 30 miles | 60 |
| Show laundry appliance work | 12 |
| Three nearest companies, miles away | 3.7, 3.8, 4.2 |
| With 4.5+ stars and at least 10 reviews | 21 |
Closest matches for Linthicum: District-Columbia Hotpoint Rpr (29.5 miles away, based in Washington, 5.0 stars from 4 reviews, lists Saturday hours); Mr. Appliance of Howard County (9.4 miles away, based in Ellicott City, 4.7 stars from 1,049 reviews, lists Saturday hours); Dr Appliance Repair - Pasadena (6.7 miles away, based in Pasadena, 5.0 stars from 18 reviews, lists Saturday hours); Sears Appliance Repair (5.7 miles away, based in Glen Burnie, 4.2 stars from 908 reviews, lists Saturday hours).
GE Dryer Lines and Features
How GE Dryers Are Built
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Symptoms and First Checks
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Error Codes
| Code | What it means |
|---|---|
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Dryer will not start when you press Start
- Drum turns but the air stays cool
- Clothes still damp after a full cycle
Inside a Dryer Repair Visit
Owner Care for GE Dryers
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Any error code on the display
- The brand, model and serial number from the label inside the door or on the back panel
- Whether the dryer is gas or electric
Around Linthicum
Most dryer calls in Linthicum come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)
The Maryland Board of Plumbing issues master, journey and apprentice natural gas fitter licenses and a propane gas fitter certificate, and recognizes certain Baltimore County and WSSC gas fitter licenses. Source: Md. Code, Business Occupations and Professions ยง 12-302 (Maryland General Assembly)
Before You Book in Linthicum
- Is your company licensed where my state requires it, and insured?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Can you give a written estimate before ordering parts?
GE Dryer Repair FAQs: Linthicum, MD
Do you work for GE?
Why does my dryer take so long to dry?
Should I repair or replace my GE dryer?
More Laundry Repair in Linthicum, MD
GE Dryer Repair in Nearby Cities
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.