Serving Forsyth, Missouri and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

GE Dryer Repair in Forsyth, MO

A local list of independent GE dryer technicians for Forsyth and the Taney County area, plus a helpline that connects you with one.

Need GE dryer repair near Forsyth?
Call our helpline to be connected with an independent technician who repairs GE dryers.
☎(888) 772-9805
✓10 companies listed for Forsyth✓Independent, not a manufacturer✓Public ratings & distances

If your GE dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. The Forsyth list starts with companies that name GE, followed by other appliance repair companies that list dryer work.

Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.

Independent GE Dryer Technicians, Forsyth MO

We found 40 appliance repair companies within 60 miles of Forsyth. The rest are spread across Springfield (28), Branson (3), and Ozark (2). Distances run up to about 39 miles. None of the companies within 60 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Nearest on the list: J&K Hvac Llc and Appliance Repair, around 7.0 miles out. Rated companies nearby average 4.4 stars across 23 businesses. Forsyth is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Mentions GE
Sears Appliance Repair
1029 Hwy 62 E Ste 1, Mountain Home, AR 72653
46.9 mi from Forsyth
★★★★ 4.1 (26 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Mr. Appliance of Branson
542 Gretna Rd Ste 140, Branson, MO 65616
10.0 mi from Forsyth
★★★★★ 4.8 (47 reviews)
DryersWashers
Washer & Dryer Repair
Service Brothers Appliance Repair
5133 S Campbell Ave Ste 101, Springfield, MO 65810
32.0 mi from Forsyth
★★★★½ 4.7 (655 reviews)
DryersWashers
Washer & Dryer Repair
Richardson Appliance Sales & Service
428 Gipson Rd, Harrison, AR 72601
29.6 mi from Forsyth
★★★★½ 4.7 (280 reviews)
DryersWashersSaturday hours
Appliance Repair
J&K Hvac Llc and Appliance Repair
605 Stone Tree Dr Unit B, Branson, MO 65616
7.0 mi from Forsyth
★★★★★ 4.9 (430 reviews)
Saturday hours
Washer & Dryer Repair
Sears Appliance Repair
3100 S Elliott Ave, Aurora, MO 65605
38.5 mi from Forsyth
★★★★½ 4.6 (271 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
EZ Appliance Geeks
1073 S Mahn Ave, Springfield, MO 65802
38.2 mi from Forsyth
★★★★ 3.8 (10 reviews)
DryersWashersSaturday hours
Appliance Repair
Service Today Company Inc.
1100 S 3rd St, Ozark, MO 65721
23.2 mi from Forsyth
★★★★★ 4.9 (34 reviews)
Saturday hours
Appliance Repair
Mintex Expert Appliance Service, LLC
184 Reno Springs Estates Ct, Walnut Shade, MO 65771
12.0 mi from Forsyth
★★★★★ 5.0 (3 reviews)
Appliance Repair
Certified Appliance Repair
2300 W Farm Rd 182, Springfield, MO 65810
32.3 mi from Forsyth
★★★★★ 5.0 (97 reviews)

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Dryer repair near Forsyth at a glance
Open on Saturdays (per listing)35
Rated 4.5 stars or higher (10+ reviews)12
Mention GE1
Three nearest companies, miles away7.0, 10.0, 12.0
List dryer or washer & dryer work7
Companies within 60 miles53

The leading options for Forsyth are Sears Appliance Repair (46.9 miles away, based in Mountain Home, 4.1 stars from 26 reviews, lists Saturday hours); Mr. Appliance of Branson (10.0 miles away, based in Branson, 4.8 stars from 47 reviews); Service Brothers Appliance Repair (32.0 miles away, based in Springfield, 4.7 stars from 655 reviews); Richardson Appliance Sales & Service (29.6 miles away, based in Harrison, 4.7 stars from 280 reviews, lists Saturday hours).

⚡ Get connected with a GE dryer technician near Forsyth
☎(888) 772-9805

GE Dryer Lines and Features

GE / GE Profile aluminized alloy drum dryers with Sensor DryTop-load-pair electric dryers with an aluminized alloy drum, a sanitize cycle and moisture-sensing Sensor Dry.
GE Profile Smart Front Load Dryers with Steam and SanitizeLarge-capacity front-load dryers with steam, a sanitize cycle and SmartHQ app connectivity.

What Makes GE Dryer Repairs Different

GE allows only rigid or flexible metal vent duct and says plastic flexible duct is not acceptable because it collapses, cuts airflow and can collect water. Source: GE Appliances - Dryer - Things To Check For A Venting Issue

An electric GE dryer receiving only partial (120V) power from its 240V circuit can tumble normally but produce no heat, and a dryer wired to a 120V circuit can take up to three times longer to dry. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat

What GE Says to Check First

  • Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
  • Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats

What GE Dryer Codes Mean

CodeWhat it means
Check and Clean Drain Pump Filter (UltraFast Combo)A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages
Confirm H2O Supply is ON (UltraFast Combo)No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages
18 (UltraFast Combo)The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages

Signs Your GE Dryer Needs a Technician

  • Dryer will not start when you press Start
  • Outside of the cabinet gets unusually hot
  • Clothes still damp after a full cycle

What a Dryer Repair Technician Checks

Heating elementElectric dryers heat with a coiled element. If the drum turns but the air stays cool, the element is checked for continuity along with the thermostats and fuses that feed it.
Door switch and start circuitA dryer that does nothing when Start is pressed may have a failed door switch, start switch, fuse or control board. Checking power at the outlet comes first, since an electric dryer needs both legs of a 240-volt circuit to heat.

Care GE Recommends for Its Dryers

Brand guides: GE Dryer Not Heating: What to Check.

What GE Dryer Repairs Cost

A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:

A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

What to Have Ready for a GE Dryer Call

  • Any error code on the display
  • How long the vent run is and where it exits the house
  • What happens when you press Start (no response, hum, runs with no heat, stops early)

Around Forsyth

Most dryer calls in Forsyth come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Gas appliance and mechanical trade credentials are issued by local governments; Kansas City, for example, certifies gas-fired appliance supervisors, mechanical supervisors and master pipe fitters. Source: KCMO BizCare: Contractor Licensing

In Missouri, you can report a problem to the Missouri Attorney General's Office, Consumer Protection.

Before You Book in Forsyth

  • What is the service call or diagnostic fee, and is it applied to the repair?
  • How often do you repair GE dryers, and do you carry common parts on the truck?
  • What guarantee do you give on parts and labor?

GE Dryer Repair FAQs: Forsyth, MO

Why do my clothes come out damp?
Restricted airflow is the most common cause: a full lint screen, a crushed or kinked duct, or a clogged exhaust hood outside. Overloading and a dirty moisture sensor are next. If the vent is clear and the dryer still runs long, a technician can test the heating parts.
What makes a dryer stop heating?
On an electric dryer the usual suspects are the heating element, a blown thermal fuse, a failed thermostat or a tripped breaker on one leg of the circuit. On a gas dryer, check that the gas is on, then the igniter and valve coils. A blocked vent can trip the safety fuse on both types, so it should be cleared first.
Do you work for GE?
No. We are an independent directory and are not affiliated with GE. The companies listed are independent technicians. For manufacturer coverage questions, contact GE directly.

More Laundry Repair in Forsyth, MO

More GE Dryer Repair Pages Nearby

Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.

One call to a GE dryer technician near you
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech