Most GE dryer repairs in Brandon involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Brandon, with those that mention GE first, then the nearest dryer repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Dryers Near Brandon
Within 30 miles of Brandon there are 37 appliance repair companies in our data. 6 list an address in Brandon, and other nearby bases include Jackson (20), Pearl (4), and Madison (3). The farthest listed company is about 16 miles out. Quality Appliance Repair is the nearest, roughly 0.4 miles from Brandon. No company within 90 miles of Brandon mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 36 rated companies, the average public rating is 4.7 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| List dryer or washer & dryer work | 2 |
|---|---|
| Repair companies inside 30 miles | 37 |
| Mention GE | 0 |
| Distance to the three closest (mi) | 0.4, 0.5, 1.0 |
| Rated 4.5 stars or higher (10+ reviews) | 3 |
| Listing Saturday hours | 19 |
First up for Brandon: Mr. Appliance of Madison (13.8 miles away, based in Madison, 4.5 stars from 179 reviews); Sears Appliance Repair (13.0 miles away, based in Ridgeland, 4.1 stars from 321 reviews, lists Saturday hours); Fixit Refrigeration & Appliance Inc (3.5 miles away, 4.8 stars from 6 reviews); Rush Appliance Repair Contractors (2.8 miles away, 5.0 stars from 2 reviews, lists Saturday hours).
GE Dryer Features Technicians Work On
What a GE Dryer Technician Deals With
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
GE Dryer Symptoms and First Checks
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
GE Dryer Error Codes
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Drum turns but the air stays cool
- Squealing, thumping or grinding while it runs
- Burning or hot smell during a cycle
Inside a Dryer Repair Visit
Care GE Recommends for Its Dryers
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
- Whether the dryer is gas or electric
Dryer Notes for Brandon, MS
Most dryer calls in Brandon come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Mississippi's State Board of Contractors has no appliance repair classification; it licenses mechanical, HVAC and plumbing contractors, with residential mechanical and plumbing subcontractors required to hold a license. Source: MSBOC: Classifications
In Mississippi, you can check a license with the MSBOC Check A License or report a problem to the Mississippi Attorney General's Office, Consumer Protection Division.
Questions to Ask a Brandon Technician
- Is your company licensed where my state requires it, and insured?
- Will you check the vent and lint path as part of the visit?
- How often do you repair GE dryers, and do you carry common parts on the truck?
GE Dryer Repair FAQs: Brandon, MS
Is this GE customer service?
Should I repair or replace my GE dryer?
What should I do about a GE error code?
More Laundry Repair in Brandon, MS
GE Dryer Repair Near Brandon
Write down any error code your GE dryer shows and when it appears. It helps a Brandon technician bring the right parts.