Serving Biloxi, Mississippi and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

GE Dryer Repair in Biloxi, MS

A local list of independent GE dryer technicians for Biloxi and the Harrison County area, plus a helpline that connects you with one.

Talk to a GE dryer tech in Biloxi
Tell us the model and the problem and we will connect you with a local technician.
☎(888) 772-9805
✓10 companies listed for Biloxi✓Independent, not a manufacturer✓Public ratings & distances

GE owners in Biloxi usually want two things from a repair company: experience with the brand and quick access to parts. The Biloxi list starts with companies that name GE, followed by other appliance repair companies that list dryer work.

Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.

GE Dryer Repair Near Biloxi

12 repair companies serve Biloxi from within 30 miles. 2 list an address in Biloxi, and other nearby bases include Gulfport (2), Long Beach (2), and Moss Point (2). Distances run up to about 26 miles. No company within 90 miles of Biloxi mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Sears Appliance Repair, about 4.2 miles away. The 12 rated companies in range average 3.9 stars.

Washer & Dryer Repair
Sears Appliance Repair
2600 Beach Blvd, Biloxi, MS 39531
4.2 mi from Biloxi
★★★★½ 4.4 (205 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
12057 US 49, Gulfport, MS 39503
9.0 mi from Biloxi
★★★★ 4.0 (196 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
7827 MS-613, Moss Point, MS 39563
24.3 mi from Biloxi
★★★★ 4.0 (76 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Gary's Appliance Sales, Service & Parts
308 Santini St, Biloxi, MS 39530
4.2 mi from Biloxi
★★★ 2.8 (28 reviews)
DryersWashers
Appliance Repair
Central Appliance Co Inc.
1833 Denny Ave, Pascagoula, MS 39567
24.7 mi from Biloxi
★★★★★ 4.8 (522 reviews)
Saturday hours
Appliance Repair
Mr D's Appliance Repair
Long Beach, MS 39560
13.6 mi from Biloxi
★★★★★ 5.0 (3 reviews)
Appliance Repair
Dobies Appliance Repair LLC
11705 Seaman Rd, Vancleave, MS 39565
11.5 mi from Biloxi
★★★½ 3.5 (24 reviews)
Saturday hours
Appliance Repair
Anchor Appliance And Electrical Repair
102 Boggs Cir, Long Beach, MS 39560
14.6 mi from Biloxi
★★★★ 4.0 (35 reviews)
Appliance Repair
Triple R Appliance
4620 Saracennia Rd, Moss Point, MS 39563
24.9 mi from Biloxi
★★★★½ 4.3 (61 reviews)
Appliance Repair
Coast Appliance Repair LLC.
16343 Cable Bridge Rd #8249, Gulfport, MS 39503
17.0 mi from Biloxi
★★★½ 3.5 (50 reviews)
Saturday hours

Companies are shown by relevance and distance from Biloxi. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.

Dryer repair near Biloxi at a glance
Three nearest companies, miles away4.2, 4.2, 9.0
Open on Saturdays (per listing)6
With 4.5+ stars and at least 10 reviews1
Mention GE0
Show laundry appliance work4
Appliance repair companies in range (30 mi)12

Closest matches for Biloxi: Sears Appliance Repair (4.2 miles away, 4.4 stars from 205 reviews, lists Saturday hours); Sears Appliance Repair (9.0 miles away, based in Gulfport, 4.0 stars from 196 reviews, lists Saturday hours); Sears Appliance Repair (24.3 miles away, based in Moss Point, 4.0 stars from 76 reviews, lists Saturday hours); Gary's Appliance Sales, Service & Parts (4.2 miles away, 2.8 stars from 28 reviews).

⚡ One call to a GE dryer technician near you
☎(888) 772-9805

GE Dryer Lines and Features

SmartHQ appGE Appliances' Wi-Fi app for managing smart laundry remotely, including cycle control and notifications such as a clogged lint filter on the Combo.
GE Profile UltraFast ComboAn all-in-one washer/dryer that dries with ventless inverter heat pump technology, so it needs no outside vent and runs on a 120V plug.

How GE Dryers Are Built

The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning

An electric GE dryer receiving only partial (120V) power from its 240V circuit can tumble normally but produce no heat, and a dryer wired to a 120V circuit can take up to three times longer to dry. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat

Common GE Dryer Problems

  • Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
  • Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats

GE Dryer Error Codes

CodeWhat it means
353 (UltraFast Combo)The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages
18 (UltraFast Combo)The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages
Confirm H2O Supply is ON (UltraFast Combo)No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages

Signs Your GE Dryer Needs a Technician

  • Clothes still damp after a full cycle
  • Burning or hot smell during a cycle
  • Squealing, thumping or grinding while it runs

What a Dryer Repair Technician Checks

Thermal fuse and thermostatsA thermal fuse is a one-time safety device that opens when the dryer overheats. A blown fuse usually points to a blocked vent, so a good technician replaces the fuse and finds out why it blew.
Moisture sensor and controlsSensor-dry cycles stop when two metal strips inside the drum read dry clothes. Fabric-softener film on those strips can end cycles early or let them run long, and a technician checks them before blaming the control board.

Keeping a GE Dryer Running

Brand guides: GE Dryer Not Heating: What to Check.

GE Dryer Repair Cost Ranges

Price the repair before replacing a GE dryer. Published ranges for common jobs:

A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

Before the Technician Arrives

  • The brand, model and serial number from the label inside the door or on the back panel
  • How long the vent run is and where it exits the house
  • Whether the dryer is gas or electric

Dryer Notes for Biloxi, MS

Most dryer calls in Biloxi come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Mississippi's State Board of Contractors has no appliance repair classification; it licenses mechanical, HVAC and plumbing contractors, with residential mechanical and plumbing subcontractors required to hold a license. Source: MSBOC: Classifications

In Mississippi, you can check a license with the MSBOC Check A License or report a problem to the Mississippi Attorney General's Office, Consumer Protection Division.

Questions to Ask a Biloxi Technician

  • Do you work on gas dryers, and who handles anything involving the gas line?
  • What guarantee do you give on parts and labor?
  • What is the service call or diagnostic fee, and is it applied to the repair?

GE Dryer Repair FAQs: Biloxi, MS

What should I do about a GE error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a blocked vent. If the code returns, a technician can test the part the code points to.
How do I find a technician who knows GE dryers?
Companies whose listings or websites mention GE are flagged on this page. Most dryer technicians work on several brands, so ask how often they service your model line and whether they stock common GE parts.
What makes a dryer stop heating?
On an electric dryer the usual suspects are the heating element, a blown thermal fuse, a failed thermostat or a tripped breaker on one leg of the circuit. On a gas dryer, check that the gas is on, then the igniter and valve coils. A blocked vent can trip the safety fuse on both types, so it should be cleared first.

More Laundry Repair in Biloxi, MS

More GE Dryer Repair Pages Nearby

Write down any error code your GE dryer shows and when it appears. It helps a Biloxi technician bring the right parts.

Call to reach an independent GE dryer tech
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech