Most GE dryer repairs in Henderson involve the same few systems: heat, airflow, the drum drive and the controls. The Henderson list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
GE Dryer Repair Near Henderson
Within 30 miles of Henderson there are 12 appliance repair companies in our data. 1 of them are based in Henderson itself, and the rest are spread across Wake Forest (3), Youngsville (2), and Oxford (1). The farthest listed company is about 29 miles out. No company within 30 miles of Henderson names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Quick Fix Appliance Sales and Service is the nearest, roughly 0.9 miles from Henderson. Across 12 rated companies, the average public rating is 4.3 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 5 |
|---|---|
| Distance to the three closest (mi) | 0.9, 6.8, 19.5 |
| List dryer or washer & dryer work | 0 |
| Open on Saturdays (per listing) | 4 |
| Mention GE | 0 |
| Appliance repair companies in range (30 mi) | 12 |
The leading options for Henderson are Sears Appliance Repair (70.9 miles away, based in Dunn, 4.6 stars from 128 reviews, lists Saturday hours); Sears Appliance Repair (84.9 miles away, based in Franklin, 4.5 stars from 184 reviews, lists Saturday hours); Stovall's Appliance Services (6.8 miles away, based in Oxford, 5.0 stars from 23 reviews); The Fix - Tech Repair in Walmart Wake Forest (26.6 miles away, based in Wake Forest, 4.8 stars from 128 reviews, lists Saturday hours).
GE Dryer Features Technicians Work On
What Makes GE Dryer Repairs Different
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
What GE Says to Check First
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
GE Dryer Error Codes
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Burning or hot smell during a cycle
- Dryer shuts off a few minutes into the cycle
- Cycles take two or three runs to finish
How a Dryer Service Call Usually Goes in Henderson
Care GE Recommends for Its Dryers
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- The brand, model and serial number from the label inside the door or on the back panel
- Whether the dryer is gas or electric
Local Notes for Henderson
Most dryer calls in Henderson come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
Hiring a Dryer Repair Company in Henderson
- Can you look at the washer on the same visit if it is acting up too?
- If a part has to be ordered, how soon can you come back to finish?
- Do you work on gas dryers, and who handles anything involving the gas line?
GE Dryer Repair FAQs: Henderson, NC
Should I repair or replace my GE dryer?
What makes a dryer stop heating?
Why does my GE dryer show an error code?
More Laundry Repair in Henderson, NC
More GE Dryer Repair Pages Nearby
Write down any error code your GE dryer shows and when it appears. It helps a Henderson technician bring the right parts.