If your GE dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Who Works on GE Dryers Near Valley City
Our data shows 8 appliance repair companies inside a 60-mile radius of Valley City. Other nearby bases include Fargo (5), Moorhead (2), and Jamestown (1). The farthest listed company is about 58 miles out. None of the companies within 60 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Nearest on the list: Ty's Appliance Repair, around 33.8 miles out. The 8 rated companies in range average 4.3 stars. Valley City is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Valley City. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Mention GE | 0 |
|---|---|
| Companies within 60 miles | 8 |
| Open on Saturdays (per listing) | 4 |
| Rated 4.5 stars or higher (10+ reviews) | 5 |
| Three nearest companies, miles away | 33.8, 54.3, 55.7 |
| List dryer or washer & dryer work | 1 |
The leading options for Valley City are Sears Appliance Repair (80.3 miles away, based in Wahpeton, 4.2 stars from 19 reviews, lists Saturday hours); Pete’s Appliance Repair LLC (55.7 miles away, based in Fargo, 4.9 stars from 237 reviews); Appliance Pros (56.4 miles away, based in Fargo, 4.8 stars from 127 reviews); Ty's Appliance Repair (33.8 miles away, based in Jamestown, 5.0 stars from 12 reviews, lists Saturday hours).
GE Dryer Features Technicians Work On
What Makes GE Dryer Repairs Different
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
Common GE Dryer Problems
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Dryer will not start when you press Start
- Squealing, thumping or grinding while it runs
- Drum turns but the air stays cool
What a Dryer Repair Technician Checks
Care GE Recommends for Its Dryers
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- How long the vent run is and where it exits the house
- The brand, model and serial number from the label inside the door or on the back panel
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Local Notes for Valley City
Most dryer calls in Valley City come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
North Dakota's state plumbing license law covers water and drainage piping, not gas; fuel gas and mechanical licenses are issued by individual cities, with Fargo stating that a mechanical, fuel gas or dual license is needed in each jurisdiction where one works. Source: City of Fargo: Heating, Ventilation & Air Conditioning (HVAC) Exams
In North Dakota, you can check a license with the North Dakota Secretary of State FirstStop contractor search or report a problem to the North Dakota Attorney General, Consumer Protection Division.
Hiring a Dryer Repair Company in Valley City
- Will you check the vent and lint path as part of the visit?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Do you work on gas dryers, and who handles anything involving the gas line?
GE Dryer Repair FAQs: Valley City, ND
Why does my GE dryer show an error code?
How do I find a technician who knows GE dryers?
What makes a dryer stop heating?
Why does my dryer take so long to dry?
More Laundry Repair in Valley City, ND
More GE Dryer Repair Pages Nearby
Write down any error code your GE dryer shows and when it appears. It helps a Valley City technician bring the right parts.