GE owners in Keene usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Keene, with those that mention GE first, then the nearest dryer repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
GE Dryer Repair Near Keene
Our data shows 40 appliance repair companies inside a 60-mile radius of Keene. 1 list an address in Keene, and other nearby bases include Manchester (9), Nashua (6), and Concord (4). The closest is Lachance Appliance Service, about 0.7 miles away. None of the companies within 60 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Rated companies nearby average 4.3 stars across 38 businesses. Keene is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention GE | 0 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 30 |
| Listing Saturday hours | 39 |
| Repair companies inside 60 miles | 60 |
| List dryer or washer & dryer work | 22 |
| Distance to the three closest (mi) | 0.7, 24.8, 25.9 |
At the top of the Keene list: Sears Appliance Repair (71.1 miles away, based in Newburyport, 4.6 stars from 321 reviews, lists Saturday hours); Manny's Appliances (39.8 miles away, based in Leominster, 4.7 stars from 351 reviews, lists Saturday hours); Baron's Major Brands Appliances- Concord (45.6 miles away, based in Concord, 4.8 stars from 1,619 reviews, lists Saturday hours); Tri town Appliance (34.9 miles away, based in Fitchburg, 4.7 stars from 72 reviews).
GE Dryer Features Technicians Work On
What a GE Dryer Technician Deals With
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
GE Dryer Symptoms and First Checks
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Outside of the cabinet gets unusually hot
- Drum will not turn even though you hear a hum
- Clothes still damp after a full cycle
What a Dryer Repair Technician Checks
Care GE Recommends for Its Dryers
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Whether the dryer is gas or electric
- Any error code on the display
- How long the vent run is and where it exits the house
Around Keene
Most dryer calls in Keene come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
New Hampshire has no license for appliance repair as such; fuel gas work, including gas appliance installation and service, is licensed by the Mechanical Safety and Licensing Board, whose licenses are limited to their named specialty. Source: N.H. RSA 153:29 (NH General Court)
Fuel gas fitters are licensed by the state Mechanical Safety and Licensing Board, with specialty licenses that include fuel gas installation technician, service technician and piping installer. Source: N.H. RSA 153:29 (NH General Court)
Hiring a Dryer Repair Company in Keene
- What is the service call or diagnostic fee, and is it applied to the repair?
- Can you give a written estimate before ordering parts?
- Can you look at the washer on the same visit if it is acting up too?
GE Dryer Repair FAQs: Keene, NH
What should I do about a GE error code?
Is this GE customer service?
Why does my dryer take so long to dry?
Other Dryer Repair in Keene
More GE Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.