Most GE dryer repairs in Springdale involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Springdale, with those that mention GE first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
Who Works on GE Dryers Near Springdale
Within 30 miles of Springdale there are 40 appliance repair companies in our data. Other nearby bases include Cherry Hill Township (18), Haddonfield (3), and Voorhees Township (2). No company within 90 miles of Springdale mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Zenith Applaince Repairs Help, about 1.7 miles away. Rated companies nearby average 4.9 stars across 36 businesses.
Companies are shown by relevance and distance from Springdale. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Rated 4.5 stars or higher (10+ reviews) | 19 |
|---|---|
| Open on Saturdays (per listing) | 46 |
| Companies within 30 miles | 60 |
| Distance to the three closest (mi) | 1.7, 1.8, 1.8 |
| Show laundry appliance work | 10 |
| Mention GE | 0 |
The leading options for Springdale are Mr. Appliance of Cherry Hill (3.1 miles away, based in Marlton, 4.6 stars from 541 reviews, lists Saturday hours); Sears Appliance Repair (4.8 miles away, based in Moorestown, 4.6 stars from 287 reviews, lists Saturday hours); South Jersey Appliance (7.4 miles away, based in Blackwood, 4.9 stars from 45 reviews); Sears Appliance Repair (7.4 miles away, based in Deptford, 4.5 stars from 181 reviews, lists Saturday hours).
Know Your GE Dryer
What Makes GE Dryer Repairs Different
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
What GE Says to Check First
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
GE Dryer Error Codes
| Code | What it means |
|---|---|
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Cycles take two or three runs to finish
- Clothes still damp after a full cycle
- Dryer will not start when you press Start
How a Dryer Service Call Usually Goes in Springdale
Keeping a GE Dryer Running
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- How long the vent run is and where it exits the house
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
Dryer Notes for Springdale, NJ
Most dryer calls in Springdale come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
New Jersey has no license specific to appliance repair; plumbing work is reserved to state-licensed master plumbers, and gas piping work on the customer side of the meter falls under HVACR contractor licensing, both overseen by boards in the Division of Consumer Affairs. Source: NJ Division of Consumer Affairs: State Board of Examiners of Master Plumbers rule notice
In New Jersey, you can check a license with the New Jersey Division of Consumer Affairs License Verification System or report a problem to the New Jersey Division of Consumer Affairs.
Before You Book in Springdale
- If a part has to be ordered, how soon can you come back to finish?
- What guarantee do you give on parts and labor?
- What is the service call or diagnostic fee, and is it applied to the repair?
GE Dryer Repair FAQs: Springdale, NJ
Why do my clothes come out damp?
Why does my GE dryer show an error code?
Which Springdale technicians work on GE?
Do you work for GE?
Other Dryer Repair in Springdale
GE Dryer Repair in Nearby Cities
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.