If your GE dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. Below are independent repair companies serving Aztec, with those that mention GE first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
Independent GE Dryer Technicians, Aztec NM
13 repair companies serve Aztec from within 60 miles. The rest are spread across Durango (6), Farmington (3), and Pagosa Springs (2). Distances run up to about 59 miles. The closest is Sears Appliance Repair, about 10.1 miles away. No company within 90 miles of Aztec mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 12 rated companies in range average 4.3 stars. Because the nearest shops are farther out, ask each company whether Aztec is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| List dryer or washer & dryer work | 4 |
|---|---|
| Open on Saturdays (per listing) | 8 |
| With 4.5+ stars and at least 10 reviews | 6 |
| Repair companies inside 60 miles | 13 |
| Mention GE | 0 |
| Distance to the three closest (mi) | 10.1, 12.6, 14.5 |
First up for Aztec: Sears Appliance Repair (29.9 miles away, based in Durango, 5.0 stars from 3 reviews, lists Saturday hours); Sears Appliance Repair (10.1 miles away, based in Farmington, 3.3 stars from 49 reviews, lists Saturday hours); Advanced Appliance Repair (27.3 miles away, based in Durango, 4.8 stars from 195 reviews); Appliance Service Co.. (14.5 miles away, based in Farmington, 4.5 stars from 15 reviews).
GE Dryer Features Technicians Work On
How GE Dryers Are Built
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
GE Dryer Symptoms and First Checks
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Clothes still damp after a full cycle
- Drum will not turn even though you hear a hum
- Burning or hot smell during a cycle
Inside a Dryer Repair Visit
Care GE Recommends for Its Dryers
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
- The brand, model and serial number from the label inside the door or on the back panel
Around Aztec
Most dryer calls in Aztec come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
New Mexico has no appliance-repair-only license; installing, repairing and servicing natural gas piping and listed gas appliances falls under the Construction Industries Division's MM-2 natural gas fitting classification. Source: CID License Classifications and Scopes (City of Albuquerque)
Natural gas piping and gas appliance work needs a Construction Industries Division MM-2 (natural gas fitting) or MM-98 (mechanical) license, with journeyman gas fitter certification for workers; the plumbing-only MM-1 class excludes gas appliances and gas piping, and LP gas systems fall under a separate LP gas classification. Source: CID License Classifications and Scopes (City of Albuquerque)
Before You Book in Aztec
- If a part has to be ordered, how soon can you come back to finish?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Can you look at the washer on the same visit if it is acting up too?
GE Dryer Repair FAQs: Aztec, NM
Why does my dryer take so long to dry?
Do you work for GE?
What should I do about a GE error code?
Should I repair or replace my GE dryer?
Other Dryer Repair in Aztec
More GE Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.