Most GE dryer repairs in White Plains involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving White Plains, with those that mention GE first, then the nearest dryer repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
GE Dryer Repair Near White Plains
We found 40 appliance repair companies within 30 miles of White Plains. 3 of them are based in White Plains itself, and the rest are spread across Yonkers (10), Mt Vernon (3), and Stamford (3). The farthest listed company is about 11 miles out. White Plains Appliances Repair is the nearest, roughly 0.7 miles from White Plains. No company within 90 miles of White Plains mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 32 rated companies, the average public rating is 4.6 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention GE | 0 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 17 |
| Open on Saturdays (per listing) | 37 |
| Companies within 30 miles | 60 |
| Three nearest companies, miles away | 0.7, 1.0, 1.8 |
| Show laundry appliance work | 17 |
First up for White Plains: Mr. Appliance of Scarsdale-Mount Kisco-Brewster (1.8 miles away, 4.6 stars from 721 reviews, lists Saturday hours); Appliance Doctor (7.4 miles away, based in Yonkers, 4.8 stars from 835 reviews, lists Saturday hours); Advance Appliance (8.2 miles away, based in Yonkers, 4.3 stars from 449 reviews, lists Saturday hours); Freedome Breeze Tarrytown Applince Repair (5.3 miles away, based in Tarrytown, 4.6 stars from 183 reviews, lists Saturday hours).
GE Dryer Features Technicians Work On
What Makes GE Dryer Repairs Different
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
What GE Says to Check First
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
GE Dryer Error Codes
| Code | What it means |
|---|---|
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Squealing, thumping or grinding while it runs
- Clothes still damp after a full cycle
- Drum will not turn even though you hear a hum
What Gets Fixed on a White Plains Dryer Call
Keeping a GE Dryer Running
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- The brand, model and serial number from the label inside the door or on the back panel
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
What White Plains Owners Should Know
Most dryer calls in White Plains come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
New York State has no appliance repair license; home improvement contractor licensing is set locally, required in New York City and in Nassau, Suffolk, Westchester, Putnam and Rockland counties. Source: NY Attorney General: Contractor tip card
In New York, you can report a problem to the New York State Office of the Attorney General, Bureau of Consumer Frauds and Protection.
Questions to Ask a White Plains Technician
- Will you check the vent and lint path as part of the visit?
- Is your company licensed where my state requires it, and insured?
- What is the service call or diagnostic fee, and is it applied to the repair?
GE Dryer Repair FAQs: White Plains, NY
Do you work for GE?
What should I do about a GE error code?
What makes a dryer stop heating?
Related Repair Pages for White Plains
GE Dryer Repair in Nearby Cities
Write down any error code your GE dryer shows and when it appears. It helps a White Plains technician bring the right parts.