If your GE dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. The Pauls Valley list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
Who Works on GE Dryers Near Pauls Valley
Our data shows 39 appliance repair companies inside a 60-mile radius of Pauls Valley. The rest are spread across Oklahoma City (13), Norman (5), and Ardmore (4). The farthest listed company is about 59 miles out. No company within 90 miles of Pauls Valley mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Scott's Appliance Sales and Service, about 6.4 miles away. The 36 rated companies in range average 4.3 stars. Because the nearest shops are farther out, ask each company whether Pauls Valley is inside its regular service area.
Companies are shown by relevance and distance from Pauls Valley. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Three nearest companies, miles away | 6.4, 27.8, 32.4 |
|---|---|
| Mention GE | 0 |
| With 4.5+ stars and at least 10 reviews | 17 |
| Open on Saturdays (per listing) | 23 |
| Repair companies inside 60 miles | 39 |
| List dryer or washer & dryer work | 13 |
First up for Pauls Valley: Sears Appliance Repair (37.3 miles away, based in Norman, 4.5 stars from 149 reviews, lists Saturday hours); Adam's Appliance Repair, Inc (39.6 miles away, based in Norman, 5.0 stars from 462 reviews, lists Saturday hours); All Pro Appliance Repair Service Oklahoma City (58.4 miles away, based in Oklahoma City, 4.9 stars from 617 reviews); Adam's Appliance Repair, Inc (56.8 miles away, based in Oklahoma City, 4.9 stars from 1,147 reviews, lists Saturday hours).
Know Your GE Dryer
What a GE Dryer Technician Deals With
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
What GE Says to Check First
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Squealing, thumping or grinding while it runs
- Outside of the cabinet gets unusually hot
- Cycles take two or three runs to finish
What a Dryer Repair Technician Checks
Owner Care for GE Dryers
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- The brand, model and serial number from the label inside the door or on the back panel
- Whether the dryer is gas or electric
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Local Notes for Pauls Valley
Most dryer calls in Pauls Valley come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Oklahoma has no general appliance repair license; mechanical licensing through the Construction Industries Board excludes minor repairs the manufacturer allows an owner or agent to make, but that exclusion does not reach gas piping, gas controls, appliance venting or opening a sealed refrigeration system. Source: OAC 158:50 Mechanical Industry Rules (Oklahoma Construction Industries Board)
Natural gas piping work requires a Natural Gas Piping mechanical license or a plumbing license issued by the Oklahoma Construction Industries Board. Source: OAC 158:50 Mechanical Industry Rules (Oklahoma Construction Industries Board)
Before You Book in Pauls Valley
- Will you check the vent and lint path as part of the visit?
- Can you give a written estimate before ordering parts?
- Can you look at the washer on the same visit if it is acting up too?
GE Dryer Repair FAQs: Pauls Valley, OK
Why does my GE dryer show an error code?
Which Pauls Valley technicians work on GE?
Why does my dryer take so long to dry?
Is this GE customer service?
Other Dryer Repair in Pauls Valley
More GE Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.