Serving Yukon, Oklahoma and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

GE Dryer Repair in Yukon, OK

Independent repair companies near Yukon that work on GE dryers, with companies that mention GE listed first.

Need GE dryer repair near Yukon?
Tell us the model and the problem and we will connect you with a local technician.
☎(888) 772-9805
✓10 companies listed for Yukon✓Independent, not a manufacturer✓Public ratings & distances

A GE dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. Below are independent repair companies serving Yukon, with those that mention GE first, then the nearest dryer repair companies.

Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.

GE Dryer Repair Near Yukon

Within 30 miles of Yukon there are 30 appliance repair companies in our data. The rest are spread across Oklahoma City (13), Norman (5), and Edmond (3). The closest is Mr. Appliance of Yukon, Stillwater, and Edmond, about 5.9 miles away. None of the repair companies near Yukon name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Rated companies nearby average 4.3 stars across 28 businesses.

Washer & Dryer Repair
Adam's Appliance Repair, Inc
7712 NW 3rd St Ste D, Oklahoma City, OK 73127
7.3 mi from Yukon
★★★★★ 4.9 (1,147 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
All Pro Appliance Repair Service Oklahoma City
317 NW 60th St Ste d, Oklahoma City, OK 73118
13.8 mi from Yukon
★★★★★ 4.9 (617 reviews)
DryersWashers
Washer & Dryer Repair
Mr. Appliance of Yukon, Stillwater, and Edmond
13100 Colony Pointe Blvd Ste 107, Piedmont, OK 73078
5.9 mi from Yukon
★★★★★ 4.9 (884 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
All Pro Appliance Repair Service
2236 NW 164th St Suite #2, Edmond, OK 73013
14.4 mi from Yukon
★★★★★ 4.9 (1,254 reviews)
DryersWashers
Washer & Dryer Repair
Mr. Appliance of Oklahoma City
230 W Wilshire Blvd Suite 4G, Oklahoma City, OK 73116
14.0 mi from Yukon
★★★★½ 4.7 (1,102 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
4400 S Western Ave, Oklahoma City, OK 73109
14.8 mi from Yukon
★★★★ 4.2 (323 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Adam's Appliance Repair, Inc
3557 National Dr # C, Norman, OK 73069
24.3 mi from Yukon
★★★★★ 5.0 (462 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
3201 W Main St, Norman, OK 73072
25.9 mi from Yukon
★★★★½ 4.5 (149 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
6909 E Reno Ave, Midwest City, OK 73110
20.3 mi from Yukon
★★★★½ 4.5 (146 reviews)
DryersWashersSaturday hours
Appliance Repair
AlphaTek Appliance Repair
3030 Northwest Expy Ste 200 #534, Oklahoma City, OK 73112
10.9 mi from Yukon
★★★★★ 4.9 (1,440 reviews)
Saturday hours

Companies are shown by relevance and distance from Yukon. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.

Dryer repair near Yukon at a glance
Listing Saturday hours17
List dryer or washer & dryer work10
Mention GE0
Repair companies inside 30 miles30
Rated 4.5 stars or higher (10+ reviews)14
Distance to the three closest (mi)5.9, 7.3, 8.0

At the top of the Yukon list: Adam's Appliance Repair, Inc (7.3 miles away, based in Oklahoma City, 4.9 stars from 1,147 reviews, lists Saturday hours); All Pro Appliance Repair Service Oklahoma City (13.8 miles away, based in Oklahoma City, 4.9 stars from 617 reviews); Mr. Appliance of Yukon, Stillwater, and Edmond (5.9 miles away, based in Piedmont, 4.9 stars from 884 reviews, lists Saturday hours); All Pro Appliance Repair Service (14.4 miles away, based in Edmond, 4.9 stars from 1,254 reviews).

⚡ One call to a GE dryer technician near you
☎(888) 772-9805

GE Dryer Features Technicians Work On

SmartHQ appGE Appliances' Wi-Fi app for managing smart laundry remotely, including cycle control and notifications such as a clogged lint filter on the Combo.
GE / GE Profile aluminized alloy drum dryers with Sensor DryTop-load-pair electric dryers with an aluminized alloy drum, a sanitize cycle and moisture-sensing Sensor Dry.

What a GE Dryer Technician Deals With

GE allows only rigid or flexible metal vent duct and says plastic flexible duct is not acceptable because it collapses, cuts airflow and can collect water. Source: GE Appliances - Dryer - Things To Check For A Venting Issue

Common GE Dryer Problems

  • Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
  • Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat

GE Dryer Error Codes

CodeWhat it means
18 (UltraFast Combo)The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages
Confirm H2O Supply is ON (UltraFast Combo)No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages
353 (UltraFast Combo)The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages

GE Dryer Problems Worth a Service Call

  • Clothes still damp after a full cycle
  • Outside of the cabinet gets unusually hot
  • Drum will not turn even though you hear a hum

How a Dryer Service Call Usually Goes in Yukon

Door switch and start circuitA dryer that does nothing when Start is pressed may have a failed door switch, start switch, fuse or control board. Checking power at the outlet comes first, since an electric dryer needs both legs of a 240-volt circuit to heat.
Moisture sensor and controlsSensor-dry cycles stop when two metal strips inside the drum read dry clothes. Fabric-softener film on those strips can end cycles early or let them run long, and a technician checks them before blaming the control board.

Owner Care for GE Dryers

Brand guides: GE Dryer Not Heating: What to Check.

GE Dryer Repair Cost Ranges

Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:

If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

What to Have Ready for a GE Dryer Call

  • What happens when you press Start (no response, hum, runs with no heat, stops early)
  • Any error code on the display
  • How long the vent run is and where it exits the house

Dryer Notes for Yukon, OK

Most dryer calls in Yukon come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Oklahoma has no general appliance repair license; mechanical licensing through the Construction Industries Board excludes minor repairs the manufacturer allows an owner or agent to make, but that exclusion does not reach gas piping, gas controls, appliance venting or opening a sealed refrigeration system. Source: OAC 158:50 Mechanical Industry Rules (Oklahoma Construction Industries Board)

In Oklahoma, you can check a license with the Oklahoma Construction Industries Board Licensee Search or report a problem to the Oklahoma Attorney General, Consumer Protection Unit.

Before You Book in Yukon

  • What is the service call or diagnostic fee, and is it applied to the repair?
  • Can you look at the washer on the same visit if it is acting up too?
  • Will you check the vent and lint path as part of the visit?

GE Dryer Repair FAQs: Yukon, OK

Should I repair or replace my GE dryer?
Compare the repair quote with the price of a comparable new dryer and consider its age. Belts, rollers, fuses and heating parts are modest repairs on a dryer that is otherwise sound. Our repair-cost guide shows published ranges.
Why do my clothes come out damp?
Restricted airflow is the most common cause: a full lint screen, a crushed or kinked duct, or a clogged exhaust hood outside. Overloading and a dirty moisture sensor are next. If the vent is clear and the dryer still runs long, a technician can test the heating parts.
Do you work for GE?
No. We are an independent directory and are not affiliated with GE. The companies listed are independent technicians. For manufacturer coverage questions, contact GE directly.

More Laundry Repair in Yukon, OK

GE Dryer Repair Near Yukon

Write down any error code your GE dryer shows and when it appears. It helps a Yukon technician bring the right parts.

Get connected with a GE dryer technician near Yukon
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech