Most GE dryer repairs in Chester involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Chester, with those that mention GE first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Who Works on GE Dryers Near Chester
Our data shows 40 appliance repair companies inside a 30-mile radius of Chester. 1 of them are based in Chester itself, and other nearby bases include Media (4), Philadelphia (4), and Glenolden (3). The farthest listed company is about 10 miles out. Nbili Appliance Repair is the nearest, roughly 1.7 miles from Chester. None of the repair companies near Chester name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Rated companies nearby average 4.6 stars across 37 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 1.7, 3.5, 3.8 |
|---|---|
| Mention GE | 0 |
| List dryer or washer & dryer work | 7 |
| Listing Saturday hours | 39 |
| Rated 4.5 stars or higher (10+ reviews) | 10 |
| Repair companies inside 30 miles | 60 |
Closest matches for Chester: Mr. Appliance of the Delaware Valley (10.4 miles away, based in Chadds Ford, 4.6 stars from 1,953 reviews, lists Saturday hours); Sears Appliance Repair (5.1 miles away, based in Holmes, 4.5 stars from 314 reviews, lists Saturday hours); Sears Appliance Repair (5.7 miles away, based in Media, 4.1 stars from 484 reviews, lists Saturday hours); Gowen's Appliance Repair (4.4 miles away, based in Media, 4.9 stars from 460 reviews).
GE Dryer Lines and Features
What a GE Dryer Technician Deals With
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
GE Dryer Symptoms and First Checks
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Dryer shuts off a few minutes into the cycle
- Drum turns but the air stays cool
- Burning or hot smell during a cycle
Inside a Dryer Repair Visit
Keeping a GE Dryer Running
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
- Any error code on the display
Dryer Notes for Chester, PA
Most dryer calls in Chester come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Pennsylvania has no statewide license for appliance repair or for most construction trades; contractors doing home improvement work must register with the Attorney General, and some municipalities license trades such as plumbing. Source: Contractor Licensing (Pennsylvania Department of Labor & Industry)
There is no statewide plumbing or trade license in Pennsylvania, so any licensing for gas piping work is set by the municipality where the work happens (Philadelphia, for example, issues its own plumber licenses). Source: Contractor Licensing (Pennsylvania Department of Labor & Industry)
Hiring a Dryer Repair Company in Chester
- Will you check the vent and lint path as part of the visit?
- Do you work on gas dryers, and who handles anything involving the gas line?
- What guarantee do you give on parts and labor?
GE Dryer Repair FAQs: Chester, PA
Do you work for GE?
Why do my clothes come out damp?
Which Chester technicians work on GE?
Other Dryer Repair in Chester
GE Dryer Repair in Nearby Cities
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.