A GE dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. The Providence list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
Independent GE Dryer Technicians, Providence RI
40 repair companies serve Providence from within 30 miles. 13 of them are based in Providence itself, and the rest are spread across Pawtucket (9), Cranston (5), and Johnston (3). Distances run up to about 8 miles. Providence Appliance Repair Tech is the nearest, roughly 0.2 miles from Providence. No company within 30 miles of Providence names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. The 31 rated companies in range average 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| List dryer or washer & dryer work | 11 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 21 |
| Companies within 30 miles | 60 |
| Mention GE | 0 |
| Three nearest companies, miles away | 0.2, 0.4, 0.5 |
| Open on Saturdays (per listing) | 44 |
At the top of the Providence list: Sears Appliance Repair (73.7 miles away, based in Newburyport, 4.6 stars from 321 reviews, lists Saturday hours); Wickford Appliance Sales & Service (4.4 miles away, based in Pawtucket, 4.9 stars from 1,432 reviews, lists Saturday hours); Wickford Appliance Sales & Service (4.1 miles away, based in Cranston, 4.9 stars from 1,254 reviews, lists Saturday hours); Wickford Appliance - Outlet Store (6.7 miles away, based in Cumberland, 4.9 stars from 769 reviews, lists Saturday hours).
GE Dryer Lines and Features
What a GE Dryer Technician Deals With
GE allows only rigid or flexible metal vent duct and says plastic flexible duct is not acceptable because it collapses, cuts airflow and can collect water. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
An electric GE dryer receiving only partial (120V) power from its 240V circuit can tumble normally but produce no heat, and a dryer wired to a 120V circuit can take up to three times longer to dry. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
GE Dryer Symptoms and First Checks
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Drum will not turn even though you hear a hum
- Dryer shuts off a few minutes into the cycle
- Clothes still damp after a full cycle
How a Dryer Service Call Usually Goes in Providence
Owner Care for GE Dryers
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- The brand, model and serial number from the label inside the door or on the back panel
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- How long the vent run is and where it exits the house
Local Notes for Providence
Most dryer calls in Providence come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Rhode Island does not issue a license named for appliance repair, but its Department of Labor and Training licenses pipefitters and refrigeration technicians, including a limited natural gas service license that covers servicing gas-fueled appliances. Source: Bureau of Pipefitters, Refrigeration Technicians, Sprinklerfitters, Sheet Metal Workers and Oil Heat Contractors (260-RICR-30-15-2)
Gas piping falls under pipefitter licenses from the Department of Labor and Training, which also issues limited natural gas and propane service licenses for reconnecting gas service and servicing gas appliances. Source: Bureau of Pipefitters, Refrigeration Technicians, Sprinklerfitters, Sheet Metal Workers and Oil Heat Contractors (260-RICR-30-15-2)
Before You Book in Providence
- Can you give a written estimate before ordering parts?
- Is your company licensed where my state requires it, and insured?
- Do you work on gas dryers, and who handles anything involving the gas line?
GE Dryer Repair FAQs: Providence, RI
Do you work for GE?
Why does my GE dryer show an error code?
Which Providence technicians work on GE?
Is my GE dryer worth repairing?
Other Dryer Repair in Providence
GE Dryer Repair in Nearby Cities
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.