Most GE dryer repairs in Aiken involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Aiken, with those that mention GE first, then the nearest dryer repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Dryers Near Aiken
27 repair companies serve Aiken from within 30 miles. 4 list an address in Aiken, and the rest are spread across Augusta (16), Clearwater (2), and North Augusta (2). Distances run up to about 28 miles. None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Sears Appliance Repair is the nearest, roughly 0.1 miles from Aiken. Rated companies nearby average 4.4 stars across 14 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 13 |
|---|---|
| Distance to the three closest (mi) | 0.1, 2.2, 3.7 |
| Show laundry appliance work | 4 |
| With 4.5+ stars and at least 10 reviews | 4 |
| Companies within 30 miles | 27 |
| Mention GE | 0 |
At the top of the Aiken list: Sears Appliance Repair (77.3 miles away, based in Lugoff, 4.3 stars from 46 reviews, lists Saturday hours); Sears Appliance Repair (0.1 miles away, 4.4 stars from 26 reviews, lists Saturday hours); Beech Island Appliance Service Co. (11.8 miles away, based in Beech Island, 4.9 stars from 159 reviews); Mr. Appliance of West Augusta (17.8 miles away, based in Augusta, 4.1 stars from 735 reviews).
GE Dryer Features Technicians Work On
What Makes GE Dryer Repairs Different
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
What GE Says to Check First
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Dryer shuts off a few minutes into the cycle
- Drum will not turn even though you hear a hum
- Drum turns but the air stays cool
What a Dryer Repair Technician Checks
Care GE Recommends for Its Dryers
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- The brand, model and serial number from the label inside the door or on the back panel
- Any error code on the display
- What happens when you press Start (no response, hum, runs with no heat, stops early)
What Aiken Owners Should Know
Most dryer calls in Aiken come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
South Carolina does not issue a license specific to appliance repair; mechanical work such as plumbing, heating, air conditioning and refrigeration is licensed by the Contractor's Licensing Board for commercial-scale jobs and by the Residential Builders Commission for residential HVAC and plumbing. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature
South Carolina has no standalone gas piping license; gas lines serving gas-fired equipment are installed under mechanical classifications such as Plumbing, Heating and Packaged Equipment issued through the Department of Labor, Licensing and Regulation. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature
Hiring a Dryer Repair Company in Aiken
- If a part has to be ordered, how soon can you come back to finish?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Do you work on gas dryers, and who handles anything involving the gas line?
GE Dryer Repair FAQs: Aiken, SC
Do you work for GE?
Which Aiken technicians work on GE?
Should I repair or replace my GE dryer?
Why does my dryer take so long to dry?
Other Dryer Repair in Aiken
More GE Dryer Repair Pages Nearby
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.