GE owners in Fountain Inn usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Fountain Inn, with those that mention GE first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Independent GE Dryer Technicians, Fountain Inn SC
Our data shows 34 appliance repair companies inside a 30-mile radius of Fountain Inn. The rest are spread across Greenville (11), Spartanburg (5), and Anderson (3). The farthest listed company is about 30 miles out. Nearest on the list: Byrds Appliance Service, around 4.4 miles out. None of the repair companies near Fountain Inn name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The 34 rated companies in range average 4.2 stars.
Companies are shown by relevance and distance from Fountain Inn. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Listing Saturday hours | 18 |
|---|---|
| Appliance repair companies in range (30 mi) | 34 |
| Show laundry appliance work | 12 |
| Mention GE | 0 |
| With 4.5+ stars and at least 10 reviews | 13 |
| Distance to the three closest (mi) | 4.4, 6.9, 9.5 |
The leading options for Fountain Inn are Mr. Appliance of Greater Greenville (9.8 miles away, based in Greenville, 4.8 stars from 1,221 reviews); Appliance GrandMasters (17.0 miles away, based in Greenville, 4.7 stars from 1,162 reviews, lists Saturday hours); The Olde Homestead, Inc. (17.4 miles away, based in Greenville, 4.9 stars from 1,104 reviews); Sholom Appliance Service & Repair LLC (12.9 miles away, based in Duncan, 5.0 stars from 200 reviews).
Know Your GE Dryer
How GE Dryers Are Built
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE allows only rigid or flexible metal vent duct and says plastic flexible duct is not acceptable because it collapses, cuts airflow and can collect water. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
GE Dryer Symptoms and First Checks
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Cycles take two or three runs to finish
- Clothes still damp after a full cycle
- Squealing, thumping or grinding while it runs
Inside a Dryer Repair Visit
Owner Care for GE Dryers
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- How long the vent run is and where it exits the house
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- The brand, model and serial number from the label inside the door or on the back panel
What Fountain Inn Owners Should Know
Most dryer calls in Fountain Inn come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
South Carolina does not issue a license specific to appliance repair; mechanical work such as plumbing, heating, air conditioning and refrigeration is licensed by the Contractor's Licensing Board for commercial-scale jobs and by the Residential Builders Commission for residential HVAC and plumbing. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature
South Carolina has no standalone gas piping license; gas lines serving gas-fired equipment are installed under mechanical classifications such as Plumbing, Heating and Packaged Equipment issued through the Department of Labor, Licensing and Regulation. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature
Before You Book in Fountain Inn
- Do you work on gas dryers, and who handles anything involving the gas line?
- If a part has to be ordered, how soon can you come back to finish?
- What guarantee do you give on parts and labor?
GE Dryer Repair FAQs: Fountain Inn, SC
Is this GE customer service?
What should I do about a GE error code?
What makes a dryer stop heating?
More Laundry Repair in Fountain Inn, SC
GE Dryer Repair Near Fountain Inn
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.