Most GE dryer repairs in Taylors involve the same few systems: heat, airflow, the drum drive and the controls. The Taylors list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
Who Works on GE Dryers Near Taylors
Our data shows 34 appliance repair companies inside a 30-mile radius of Taylors. 1 of them are based in Taylors itself, and the rest are spread across Greenville (11), Spartanburg (5), and Greer (2). None of the repair companies near Taylors name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Nearest on the list: Appliance Medic, around 0.7 miles out. The 34 rated companies in range average 4.4 stars.
Companies are shown by relevance and distance from Taylors. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Mention GE | 0 |
|---|---|
| Repair companies inside 30 miles | 34 |
| Distance to the three closest (mi) | 0.7, 4.7, 4.7 |
| With 4.5+ stars and at least 10 reviews | 15 |
| List dryer or washer & dryer work | 10 |
| Open on Saturdays (per listing) | 18 |
Closest matches for Taylors: Mr. Appliance of Greater Greenville (6.7 miles away, based in Greenville, 4.8 stars from 1,221 reviews); The Olde Homestead, Inc. (7.1 miles away, based in Greenville, 4.9 stars from 1,104 reviews); Appliance GrandMasters (9.8 miles away, based in Greenville, 4.7 stars from 1,162 reviews, lists Saturday hours); Sholom Appliance Service & Repair LLC (10.4 miles away, based in Duncan, 5.0 stars from 200 reviews).
Know Your GE Dryer
What Makes GE Dryer Repairs Different
An electric GE dryer receiving only partial (120V) power from its 240V circuit can tumble normally but produce no heat, and a dryer wired to a 120V circuit can take up to three times longer to dry. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
What GE Says to Check First
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Clothes still damp after a full cycle
- Dryer shuts off a few minutes into the cycle
- Drum will not turn even though you hear a hum
What Gets Fixed on a Taylors Dryer Call
Keeping a GE Dryer Running
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- How long the vent run is and where it exits the house
- The brand, model and serial number from the label inside the door or on the back panel
- Whether the dryer is gas or electric
Dryer Notes for Taylors, SC
Most dryer calls in Taylors come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
South Carolina does not issue a license specific to appliance repair; mechanical work such as plumbing, heating, air conditioning and refrigeration is licensed by the Contractor's Licensing Board for commercial-scale jobs and by the Residential Builders Commission for residential HVAC and plumbing. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature
In South Carolina, you can check a license with the SC LLR License Lookup or report a problem to the South Carolina Department of Consumer Affairs.
Questions to Ask a Taylors Technician
- How often do you repair GE dryers, and do you carry common parts on the truck?
- If a part has to be ordered, how soon can you come back to finish?
- Do you work on gas dryers, and who handles anything involving the gas line?
GE Dryer Repair FAQs: Taylors, SC
Should I repair or replace my GE dryer?
Why do my clothes come out damp?
Why does my GE dryer show an error code?
Is this GE customer service?
Other Dryer Repair in Taylors
GE Dryer Repair in Nearby Cities
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.