Most GE dryer repairs in Crystal City involve the same few systems: heat, airflow, the drum drive and the controls. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
GE Dryer Repair Near Crystal City
Within 64 miles of Crystal City there are 8 appliance repair companies in our data. Other nearby bases include Devine (4), Eagle Pass (2), and Hondo (2). The farthest listed company is about 64 miles out. None of the repair companies near Crystal City name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Sears Appliance Repair is the nearest, roughly 39.7 miles from Crystal City. Rated companies nearby average 4.8 stars across 5 businesses. Crystal City is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 0 |
|---|---|
| Appliance repair companies in range (64 mi) | 8 |
| Mention GE | 0 |
| Open on Saturdays (per listing) | 5 |
| Show laundry appliance work | 1 |
| Distance to the three closest (mi) | 39.7, 41.2, 61.0 |
The leading options for Crystal City are Sears Appliance Repair (39.7 miles away, based in Eagle Pass, 4.0 stars from 8 reviews, lists Saturday hours); Allen Appliance Repair Team (41.2 miles away, based in Eagle Pass, 5.0 stars from 2 reviews, lists Saturday hours); General Appliance Repair (61.0 miles away, based in Hondo, 5.0 stars from 1 reviews); General Appliance Repair (61.0 miles away, based in Hondo).
GE Dryer Features Technicians Work On
What a GE Dryer Technician Deals With
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Symptoms and First Checks
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Drum will not turn even though you hear a hum
- Drum turns but the air stays cool
- Dryer will not start when you press Start
How a Dryer Service Call Usually Goes in Crystal City
Keeping a GE Dryer Running
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- The brand, model and serial number from the label inside the door or on the back panel
- Whether the dryer is gas or electric
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Around Crystal City
Most dryer calls in Crystal City come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
Gas piping counts as plumbing in Texas and requires a plumbing license, with an exemption for LP gas installers who hold a separate state LP gas license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §§1301.002, 1301.055 (Texas State Board of Plumbing Examiners)
How to Choose a Dryer Technician Near Crystal City
- Do you work on gas dryers, and who handles anything involving the gas line?
- Will you check the vent and lint path as part of the visit?
- What is the service call or diagnostic fee, and is it applied to the repair?
GE Dryer Repair FAQs: Crystal City, TX
What should I do about a GE error code?
Is my GE dryer worth repairing?
How do I find a technician who knows GE dryers?
More Laundry Repair in Crystal City, TX
More GE Dryer Repair Pages Nearby
Write down any error code your GE dryer shows and when it appears. It helps a Crystal City technician bring the right parts.