If your GE dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. The Deer Park list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
GE Dryer Repair Near Deer Park
Our data shows 40 appliance repair companies inside a 30-mile radius of Deer Park. 1 of them are based in Deer Park itself, and other nearby bases include Pasadena (15), Houston (5), and Baytown (5). Nearest on the list: Abc Appliances Repair, around 0.4 miles out. No company within 30 miles of Deer Park names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Rated companies nearby average 4.5 stars across 36 businesses.
Companies are shown by relevance and distance from Deer Park. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Appliance repair companies in range (30 mi) | 60 |
|---|---|
| Mention GE | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 22 |
| Open on Saturdays (per listing) | 42 |
| Distance to the three closest (mi) | 0.4, 2.0, 2.2 |
| List dryer or washer & dryer work | 20 |
Closest matches for Deer Park: Sears Appliance Repair (21.4 miles away, based in Alvin, 4.4 stars from 84 reviews, lists Saturday hours); Sears Appliance Repair (33.3 miles away, based in Liberty, 4.7 stars from 126 reviews, lists Saturday hours); Mr. Appliance of League City (10.1 miles away, based in Friendswood, 4.8 stars from 765 reviews, lists Saturday hours); Mr. Appliance of Deer Park (4.7 miles away, based in Pasadena, 4.8 stars from 190 reviews, lists Saturday hours).
GE Dryer Features Technicians Work On
How GE Dryers Are Built
GE allows only rigid or flexible metal vent duct and says plastic flexible duct is not acceptable because it collapses, cuts airflow and can collect water. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
GE Dryer Symptoms and First Checks
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Drum will not turn even though you hear a hum
- Drum turns but the air stays cool
- Burning or hot smell during a cycle
How a Dryer Service Call Usually Goes in Deer Park
Care GE Recommends for Its Dryers
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
- The brand, model and serial number from the label inside the door or on the back panel
What Deer Park Owners Should Know
Most dryer calls in Deer Park come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
Gas piping counts as plumbing in Texas and requires a plumbing license, with an exemption for LP gas installers who hold a separate state LP gas license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §§1301.002, 1301.055 (Texas State Board of Plumbing Examiners)
Hiring a Dryer Repair Company in Deer Park
- What guarantee do you give on parts and labor?
- Will you check the vent and lint path as part of the visit?
- Can you look at the washer on the same visit if it is acting up too?
GE Dryer Repair FAQs: Deer Park, TX
Why do my clothes come out damp?
Which Deer Park technicians work on GE?
Is this GE customer service?
Other Dryer Repair in Deer Park
GE Dryer Repair in Nearby Cities
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.