GE owners in Manor usually want two things from a repair company: experience with the brand and quick access to parts. The Manor list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Dryers Near Manor
Our data shows 40 appliance repair companies inside a 30-mile radius of Manor. 1 list an address in Manor, and other nearby bases include Austin (24), Pflugerville (7), and Round Rock (7). Distances run up to about 14 miles. Nearest on the list: Rapid Appliance Repair of Manor, around 2.3 miles out. No company within 30 miles of Manor names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. The 34 rated companies in range average 4.7 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Three nearest companies, miles away | 2.3, 6.8, 7.3 |
|---|---|
| Mention GE | 0 |
| Listing Saturday hours | 42 |
| Appliance repair companies in range (30 mi) | 60 |
| With 4.5+ stars and at least 10 reviews | 24 |
| Show laundry appliance work | 12 |
At the top of the Manor list: Sears Appliance Repair (48.3 miles away, based in La Grange, 4.7 stars from 61 reviews, lists Saturday hours); Sears Appliance Repair (75.2 miles away, based in Gatesville, 4.5 stars from 96 reviews, lists Saturday hours); The Appliance Family (9.9 miles away, based in Austin, 4.8 stars from 198 reviews, lists Saturday hours); Mr. Appliance of Austin (10.2 miles away, based in Pflugerville, 4.7 stars from 1,377 reviews, lists Saturday hours).
GE Dryer Features Technicians Work On
How GE Dryers Are Built
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Symptoms and First Checks
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Drum turns but the air stays cool
- Dryer will not start when you press Start
- Drum will not turn even though you hear a hum
How a Dryer Service Call Usually Goes in Manor
Care GE Recommends for Its Dryers
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
Local Notes for Manor
Most dryer calls in Manor come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
Gas piping counts as plumbing in Texas and requires a plumbing license, with an exemption for LP gas installers who hold a separate state LP gas license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §§1301.002, 1301.055 (Texas State Board of Plumbing Examiners)
Questions to Ask a Manor Technician
- What guarantee do you give on parts and labor?
- Can you look at the washer on the same visit if it is acting up too?
- Will you check the vent and lint path as part of the visit?
GE Dryer Repair FAQs: Manor, TX
Why does my GE dryer show an error code?
Is my GE dryer worth repairing?
How do I find a technician who knows GE dryers?
Why do my clothes come out damp?
Other Dryer Repair in Manor
More GE Dryer Repair Pages Nearby
Write down any error code your GE dryer shows and when it appears. It helps a Manor technician bring the right parts.