Most GE dryer repairs in Wells Branch involve the same few systems: heat, airflow, the drum drive and the controls. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Who Works on GE Dryers Near Wells Branch
40 repair companies serve Wells Branch from within 30 miles. The rest are spread across Austin (21), Round Rock (13), and Pflugerville (6). The farthest listed company is about 6 miles out. No company within 30 miles of Wells Branch names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Nearest on the list: Appliance Rescue Team, around 0.8 miles out. Rated companies nearby average 4.8 stars across 37 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Rated 4.5 stars or higher (10+ reviews) | 27 |
|---|---|
| Repair companies inside 30 miles | 60 |
| Mention GE | 0 |
| List dryer or washer & dryer work | 13 |
| Listing Saturday hours | 43 |
| Three nearest companies, miles away | 0.8, 0.9, 1.1 |
Closest matches for Wells Branch: Sears Appliance Repair (59.4 miles away, based in La Grange, 4.7 stars from 61 reviews, lists Saturday hours); Sears Appliance Repair (68.2 miles away, based in Gatesville, 4.5 stars from 96 reviews, lists Saturday hours); The Appliance Family (2.1 miles away, based in Austin, 4.8 stars from 198 reviews, lists Saturday hours); ExpressFix Appliance Repair (4.6 miles away, based in Round Rock, 4.8 stars from 48 reviews, lists Saturday hours).
Know Your GE Dryer
What a GE Dryer Technician Deals With
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
GE Dryer Symptoms and First Checks
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Outside of the cabinet gets unusually hot
- Drum will not turn even though you hear a hum
- Burning or hot smell during a cycle
How a Dryer Service Call Usually Goes in Wells Branch
Owner Care for GE Dryers
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Any error code on the display
- How long the vent run is and where it exits the house
- Whether the dryer is gas or electric
Local Notes for Wells Branch
Most dryer calls in Wells Branch come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
Gas piping counts as plumbing in Texas and requires a plumbing license, with an exemption for LP gas installers who hold a separate state LP gas license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §§1301.002, 1301.055 (Texas State Board of Plumbing Examiners)
Before You Book in Wells Branch
- Can you look at the washer on the same visit if it is acting up too?
- How often do you repair GE dryers, and do you carry common parts on the truck?
- Do you work on gas dryers, and who handles anything involving the gas line?
GE Dryer Repair FAQs: Wells Branch, TX
Is my GE dryer worth repairing?
Do you work for GE?
What should I do about a GE error code?
More Laundry Repair in Wells Branch, TX
More GE Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.