A GE dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Independent GE Dryer Technicians, Bluffdale UT
We found 40 appliance repair companies within 30 miles of Bluffdale. Other nearby bases include Riverton (7), Sandy (7), and South Jordan (6). Distances run up to about 8 miles. No company within 30 miles of Bluffdale names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Nearest on the list: Essential Appliance Service Solutions, around 1.8 miles out. The 21 rated companies in range average 4.8 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Open on Saturdays (per listing) | 41 |
|---|---|
| Three nearest companies, miles away | 1.8, 1.9, 2.8 |
| List dryer or washer & dryer work | 6 |
| Mention GE | 0 |
| With 4.5+ stars and at least 10 reviews | 8 |
| Companies within 30 miles | 60 |
First up for Bluffdale: General Electric Appliance (19.7 miles away, based in Salt Lake City, 2.8 stars from 4 reviews, lists Saturday hours); Eagle Appliance Repair (8.4 miles away, based in West Jordan, 4.9 stars from 204 reviews, lists Saturday hours); Appliance Man (8.1 miles away, based in Sandy, 4.7 stars from 424 reviews, lists Saturday hours); Vertex Appliance Repair (5.0 miles away, based in Saratoga Springs, 4.9 stars from 172 reviews).
Know Your GE Dryer
What Makes GE Dryer Repairs Different
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Symptoms and First Checks
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Drum turns but the air stays cool
- Outside of the cabinet gets unusually hot
- Burning or hot smell during a cycle
What a Dryer Repair Technician Checks
Keeping a GE Dryer Running
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- The brand, model and serial number from the label inside the door or on the back panel
- Whether the dryer is gas or electric
Around Bluffdale
Most dryer calls in Bluffdale come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
Gas appliance and combustion system work, starting at the outlet of the gas meter, falls under DOPL's construction trades licensing, and the qualifier for an HVAC contractor license must be a Certified Natural Gas Technician. Source: DOPL Contractor Classifications
How to Choose a Dryer Technician Near Bluffdale
- If a part has to be ordered, how soon can you come back to finish?
- What guarantee do you give on parts and labor?
- Is your company licensed where my state requires it, and insured?
GE Dryer Repair FAQs: Bluffdale, UT
Why does my GE dryer show an error code?
Why do my clothes come out damp?
Is my GE dryer worth repairing?
More Laundry Repair in Bluffdale, UT
GE Dryer Repair in Nearby Cities
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.