Most GE dryer repairs in Price involve the same few systems: heat, airflow, the drum drive and the controls. The Price list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
Independent GE Dryer Technicians, Price UT
13 repair companies serve Price from within 60 miles. 3 list an address in Price, and the rest are spread across Spanish Fork (4), Springville (4), and Manti (1). The farthest listed company is about 60 miles out. No company within 90 miles of Price mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Fix-It Pros is the nearest, roughly 0.4 miles from Price. Rated companies nearby average 4.5 stars across 10 businesses. Price is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| With 4.5+ stars and at least 10 reviews | 4 |
|---|---|
| Listing Saturday hours | 7 |
| Mention GE | 0 |
| Companies within 60 miles | 13 |
| Show laundry appliance work | 2 |
| Three nearest companies, miles away | 0.4, 0.7, 1.1 |
The leading options for Price are Sears Appliance Repair (0.7 miles away, 4.7 stars from 3 reviews, lists Saturday hours); Fix-It Pros (0.4 miles away, 3.8 stars from 13 reviews); ApplianceWorx LLC (1.1 miles away, 5.0 stars from 3 reviews); Sears Appliance Repair (57.1 miles away, based in Spanish Fork, 4.3 stars from 52 reviews, lists Saturday hours).
Know Your GE Dryer
What Makes GE Dryer Repairs Different
GE allows only rigid or flexible metal vent duct and says plastic flexible duct is not acceptable because it collapses, cuts airflow and can collect water. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
What GE Says to Check First
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Dryer will not start when you press Start
- Cycles take two or three runs to finish
- Clothes still damp after a full cycle
What a Dryer Repair Technician Checks
Owner Care for GE Dryers
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
Dryer Notes for Price, UT
Most dryer calls in Price come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Questions to Ask a Price Technician
- Is your company licensed where my state requires it, and insured?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Can you give a written estimate before ordering parts?
GE Dryer Repair FAQs: Price, UT
What makes a dryer stop heating?
Which Price technicians work on GE?
Should I repair or replace my GE dryer?
What should I do about a GE error code?
Related Repair Pages for Price
GE Dryer Repair in Nearby Cities
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.