A GE dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. Below are independent repair companies serving Smithfield, with those that mention GE first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
Who Works on GE Dryers Near Smithfield
Our data shows 24 appliance repair companies inside a 60-mile radius of Smithfield. 3 list an address in Smithfield, and other nearby bases include Ogden (3), Clearfield (3), and North Ogden (2). The farthest listed company is about 60 miles out. None of the companies within 60 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. The closest is Chandler’s Appliance, about 0.7 miles away. Across 17 rated companies, the average public rating is 4.5 stars. Because the nearest shops are farther out, ask each company whether Smithfield is inside its regular service area.
Companies are shown by relevance and distance from Smithfield. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| With 4.5+ stars and at least 10 reviews | 12 |
|---|---|
| List dryer or washer & dryer work | 1 |
| Open on Saturdays (per listing) | 13 |
| Three nearest companies, miles away | 0.7, 0.9, 4.4 |
| Repair companies inside 60 miles | 24 |
| Mention GE | 0 |
At the top of the Smithfield list: General Electric Appliance (74.5 miles away, based in Salt Lake City, 2.8 stars from 4 reviews, lists Saturday hours); Cache Appliance (6.4 miles away, based in Logan, 5.0 stars from 560 reviews); Darrell's Appliance Service And Sales Inc (4.4 miles away, 4.7 stars from 639 reviews, lists Saturday hours); R.A.C.E.R. Service Appliance Repair (11.1 miles away, based in Nibley, 4.7 stars from 12 reviews).
GE Dryer Features Technicians Work On
What Makes GE Dryer Repairs Different
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Symptoms and First Checks
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Clothes still damp after a full cycle
- Drum will not turn even though you hear a hum
- Dryer will not start when you press Start
What Gets Fixed on a Smithfield Dryer Call
Care GE Recommends for Its Dryers
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- Any error code on the display
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- How long the vent run is and where it exits the house
Around Smithfield
Most dryer calls in Smithfield come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Questions to Ask a Smithfield Technician
- If a part has to be ordered, how soon can you come back to finish?
- Will you check the vent and lint path as part of the visit?
- Can you look at the washer on the same visit if it is acting up too?
GE Dryer Repair FAQs: Smithfield, UT
Is this GE customer service?
Why do my clothes come out damp?
What makes a dryer stop heating?
Why does my GE dryer show an error code?
More Laundry Repair in Smithfield, UT
More GE Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.