Serving Kennewick, Washington and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

GE Dryer Repair in Kennewick, WA

A local list of independent GE dryer technicians for Kennewick and the Benton County area, plus a helpline that connects you with one.

GE dryer acting up in Kennewick?
One call reaches an independent technician near Kennewick who works on GE.
☎(888) 772-9805
✓10 companies listed for Kennewick✓Independent, not a manufacturer✓Public ratings & distances

Most GE dryer repairs in Kennewick involve the same few systems: heat, airflow, the drum drive and the controls. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.

Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.

Who Works on GE Dryers Near Kennewick

17 repair companies serve Kennewick from within 60 miles. 3 list an address in Kennewick, and the rest are spread across Pasco (4), Walla Walla (3), and Richland (2). Distances run up to about 58 miles. Of those, 1 mentions GE by name. Kurios Repair is the nearest, roughly 0.5 miles from Kennewick. Rated companies nearby average 4.3 stars across 17 businesses. Because the nearest shops are farther out, ask each company whether Kennewick is inside its regular service area.

Mentions GE
Sears Appliance Repair
101 S Toppenish Ave, Toppenish, WA 98948
55.7 mi from Kennewick
★★★★½ 4.4 (37 reviews)
DryersWashersSaturday hours
Mentions GE
Sears Appliance Repair
312 S Division St, Moses Lake, WA 98837
64.6 mi from Kennewick
★★★★ 3.9 (98 reviews)
DryersWashersSaturday hours
Appliance Repair
Fred's Appliance
383 S Columbia Center Blvd, Kennewick, WA 99336
2.4 mi from Kennewick
★★★★ 4.1 (731 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Master's Appliance & Refrigeration, LLC
310 W Clark St, Pasco, WA 99301
4.7 mi from Kennewick
★★★★ 4.2 (77 reviews)
DryersWashers
Appliance Repair
Smart Appliance Repair
1407 Judson Ave, Richland, WA 99354
8.1 mi from Kennewick
★★★★★ 4.8 (104 reviews)
Saturday hours
Appliance Repair
Kurios Repair
3604 W 5th Ct, Kennewick, WA 99336
0.5 mi from Kennewick
★★★★½ 4.6 (78 reviews)
Saturday hours
Appliance Repair
Dependable Appliance
1208 S 10th Ave, Pasco, WA 99301
3.9 mi from Kennewick
★★★★½ 4.4 (107 reviews)
Appliance Repair
VSG Appliances
1803 W Court St, Pasco, WA 99301
4.2 mi from Kennewick
★★★★★ 4.9 (158 reviews)
Saturday hours
Appliance Repair
UDG Services LLC
433 Liberty Ln, Richland, WA 99352
5.7 mi from Kennewick
★★★★★ 4.9 (142 reviews)
Appliance Repair
Columbia Appliance
1110 6th St #2, Umatilla, OR 97882
20.9 mi from Kennewick
★★★★★ 4.9 (423 reviews)
Saturday hours

Companies are shown by relevance and distance from Kennewick. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.

Kennewick repair companies in numbers
Mention GE1
Distance to the three closest (mi)0.5, 2.4, 2.4
Open on Saturdays (per listing)10
Show laundry appliance work3
Repair companies inside 60 miles17
Rated 4.5 stars or higher (10+ reviews)8

The leading options for Kennewick are Sears Appliance Repair (55.7 miles away, based in Toppenish, 4.4 stars from 37 reviews, lists Saturday hours); Sears Appliance Repair (64.6 miles away, based in Moses Lake, 3.9 stars from 98 reviews, lists Saturday hours); Fred's Appliance (2.4 miles away, 4.1 stars from 731 reviews, lists Saturday hours); Master's Appliance & Refrigeration, LLC (4.7 miles away, based in Pasco, 4.2 stars from 77 reviews).

⚡ One call to a GE dryer technician near you
☎(888) 772-9805

Know Your GE Dryer

GE / GE Profile aluminized alloy drum dryers with Sensor DryTop-load-pair electric dryers with an aluminized alloy drum, a sanitize cycle and moisture-sensing Sensor Dry.
GE Profile Smart Front Load Dryers with Steam and SanitizeLarge-capacity front-load dryers with steam, a sanitize cycle and SmartHQ app connectivity.

How GE Dryers Are Built

GE allows only rigid or flexible metal vent duct and says plastic flexible duct is not acceptable because it collapses, cuts airflow and can collect water. Source: GE Appliances - Dryer - Things To Check For A Venting Issue

What GE Says to Check First

  • Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
  • Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat

GE Dryer Error Codes

CodeWhat it means
Confirm H2O Supply is ON (UltraFast Combo)No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages
Check and Clean Drain Pump Filter (UltraFast Combo)A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages
18 (UltraFast Combo)The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages

When to Call for GE Dryer Repair

  • Clothes still damp after a full cycle
  • Dryer shuts off a few minutes into the cycle
  • Burning or hot smell during a cycle

How a Dryer Service Call Usually Goes in Kennewick

Door switch and start circuitA dryer that does nothing when Start is pressed may have a failed door switch, start switch, fuse or control board. Checking power at the outlet comes first, since an electric dryer needs both legs of a 240-volt circuit to heat.
Drive motorIf the dryer hums but the drum does not move, or it starts only after a push, the motor or its start circuit is tested. On many models the motor also turns the blower wheel, so airflow and tumbling fail together.

Owner Care for GE Dryers

Brand guides: GE Dryer Not Heating: What to Check.

Budgeting for a GE Dryer Repair

Price the repair before replacing a GE dryer. Published ranges for common jobs:

A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

Before the Technician Arrives

  • The brand, model and serial number from the label inside the door or on the back panel
  • What happens when you press Start (no response, hum, runs with no heat, stops early)
  • How long the vent run is and where it exits the house

What Kennewick Owners Should Know

Most dryer calls in Kennewick come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work

In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.

How to Choose a Dryer Technician Near Kennewick

  • What is the service call or diagnostic fee, and is it applied to the repair?
  • What guarantee do you give on parts and labor?
  • Can you look at the washer on the same visit if it is acting up too?

GE Dryer Repair FAQs: Kennewick, WA

What makes a dryer stop heating?
On an electric dryer the usual suspects are the heating element, a blown thermal fuse, a failed thermostat or a tripped breaker on one leg of the circuit. On a gas dryer, check that the gas is on, then the igniter and valve coils. A blocked vent can trip the safety fuse on both types, so it should be cleared first.
Do you work for GE?
No. We are an independent directory and are not affiliated with GE. The companies listed are independent technicians. For manufacturer coverage questions, contact GE directly.
Why does my dryer take so long to dry?
Restricted airflow is the most common cause: a full lint screen, a crushed or kinked duct, or a clogged exhaust hood outside. Overloading and a dirty moisture sensor are next. If the vent is clear and the dryer still runs long, a technician can test the heating parts.
Why does my GE dryer show an error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a blocked vent. If the code returns, a technician can test the part the code points to.

Other Dryer Repair in Kennewick

More GE Dryer Repair Pages Nearby

Write down any error code your GE dryer shows and when it appears. It helps a Kennewick technician bring the right parts.

Get connected with a GE dryer technician near Kennewick
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech