If your Kenmore dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. We flag companies whose listing or website mentions Kenmore and fill in with nearby dryer repair companies so you always have options.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Independent Kenmore Dryer Technicians, Troy MI
Within 30 miles of Troy there are 40 appliance repair companies in our data. 2 list an address in Troy, and other nearby bases include Madison Heights (4), Warren (4), and Royal Oak (3). Distances run up to about 12 miles. None of the repair companies near Troy name Kenmore in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The closest is Triumph Appliance Repair, about 0.3 miles away. Rated companies nearby average 4.2 stars across 36 businesses.
Companies are shown by relevance and distance from Troy. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Show laundry appliance work | 25 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 24 |
| Three nearest companies, miles away | 0.3, 2.9, 3.2 |
| Mention Kenmore | 0 |
| Listing Saturday hours | 40 |
| Appliance repair companies in range (30 mi) | 60 |
First up for Troy: Conner's Repair (7.4 miles away, based in Madison Heights, 4.7 stars from 227 reviews, lists Saturday hours); Detroit Appliance (10.6 miles away, based in Fraser, 4.8 stars from 1,139 reviews, lists Saturday hours); AJ's Appliance Repair & HVAC (9.8 miles away, based in Fraser, 4.6 stars from 1,181 reviews); Ground Up Appliance Repairs and Installations (6.2 miles away, based in Royal Oak, 4.5 stars from 96 reviews, lists Saturday hours).
Know Your Kenmore Dryer
What Makes Kenmore Dryer Repairs Different
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Symptoms and First Checks
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Error Codes
| Code | What it means |
|---|---|
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Signs Your Kenmore Dryer Needs a Technician
- Dryer shuts off a few minutes into the cycle
- Dryer will not start when you press Start
- Outside of the cabinet gets unusually hot
What a Dryer Repair Technician Checks
Keeping a Kenmore Dryer Running
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the door or on the back panel
- How long the vent run is and where it exits the house
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Around Troy
Most dryer calls in Troy come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
Gas piping work is licensed by the state through mechanical contractor specialty classifications, including fuel gas piping, fuel gas piping and venting, and LP distribution piping. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
Questions to Ask a Troy Technician
- Can you give a written estimate before ordering parts?
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
- Is your company licensed where my state requires it, and insured?
Kenmore Dryer Repair FAQs: Troy, MI
Do you work for Kenmore?
Which Troy technicians work on Kenmore?
Why is my dryer running but not heating?
Why do my clothes come out damp?
Other Dryer Repair in Troy
Kenmore Dryer Repair in Nearby Cities
Write down any error code your Kenmore dryer shows and when it appears. It helps a Troy technician bring the right parts.