Kenmore owners in Fallon usually want two things from a repair company: experience with the brand and quick access to parts. We flag companies whose listing or website mentions Kenmore and fill in with nearby dryer repair companies so you always have options.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Fallon work on Kenmore dryers every week.
Independent Kenmore Dryer Technicians, Fallon NV
We found 24 appliance repair companies within 60 miles of Fallon. Other nearby bases include Reno (12), Sparks (5), and Carson City (5). The farthest listed company is about 58 miles out. None of the companies within 60 miles mention Kenmore by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Nearest on the list: Smart Tech Appliance Repair, around 50.2 miles out. Across 19 rated companies, the average public rating is 4.3 stars. Fallon is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Fallon. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Companies within 60 miles | 24 |
|---|---|
| Mention Kenmore | 0 |
| List dryer or washer & dryer work | 9 |
| Three nearest companies, miles away | 50.2, 51.6, 51.7 |
| Listing Saturday hours | 17 |
| Rated 4.5 stars or higher (10+ reviews) | 11 |
The leading options for Fallon are Sears Appliance Repair (76.5 miles away, based in South Lake Tahoe, 4.5 stars from 60 reviews, lists Saturday hours); Mr. Appliance of Reno (53.5 miles away, based in Reno, 4.8 stars from 925 reviews, lists Saturday hours); Sears Appliance Repair (56.6 miles away, based in Carson City, 4.5 stars from 89 reviews, lists Saturday hours); Sears (53.5 miles away, based in Reno, 4.6 stars from 89 reviews, lists Saturday hours).
Kenmore Dryer Features Technicians Work On
What a Kenmore Dryer Technician Deals With
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore's Check Vent sensor alerts the owner when the dryer is not moving enough air to the outside. Source: Kenmore - Laundry List: Kenmore Dryer Buying Guide
What Kenmore Says to Check First
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| tE1-tE7 (Elite steam dryers) | A temperature sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore Dryer Problems Worth a Service Call
- Burning or hot smell during a cycle
- Cycles take two or three runs to finish
- Drum turns but the air stays cool
How a Dryer Service Call Usually Goes in Fallon
Owner Care for Kenmore Dryers
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
Most Kenmore dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
- How long the vent run is and where it exits the house
What Fallon Owners Should Know
Most dryer calls in Fallon come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Nevada has no license class for appliance repair as such; contracting work on gas piping, gas vents and water heaters falls under the State Contractors Board's C-1 plumbing and heating subclassifications. Source: Nevada Administrative Code Chapter 624 (NAC 624.190)
Installing gas supply piping and vents requires a Nevada State Contractors Board license in the C-1 plumbing and heating classification (for example the C-1d plumbing or C-1g gas pipes and vents subclassifications), and water heater installation and repair falls under subclassification C-1h. Source: Nevada Administrative Code Chapter 624 (NAC 624.190)
Before You Book in Fallon
- What guarantee do you give on parts and labor?
- Do you work on gas dryers, and who handles anything involving the gas line?
- Will you check the vent and lint path as part of the visit?
Kenmore Dryer Repair FAQs: Fallon, NV
Is my Kenmore dryer worth repairing?
Do you work for Kenmore?
Why does my dryer take so long to dry?
How do I find a technician who knows Kenmore dryers?
Related Repair Pages for Fallon
Kenmore Dryer Repair Near Fallon
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.