Most Kenmore dryer repairs in East Wenatchee involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving East Wenatchee, with those that mention Kenmore first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Kenmore Dryer Repair Near East Wenatchee
Our data shows 14 appliance repair companies inside a 60-mile radius of East Wenatchee. 2 list an address in East Wenatchee, and other nearby bases include Yakima (6), Wenatchee (1), and Ellensburg (1). Sears Appliance Repair is the nearest, roughly 0.5 miles from East Wenatchee. Of those, 1 mentions Kenmore by name. Across 14 rated companies, the average public rating is 4.1 stars. East Wenatchee is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Show laundry appliance work | 3 |
|---|---|
| Repair companies inside 60 miles | 14 |
| With 4.5+ stars and at least 10 reviews | 4 |
| Listing Saturday hours | 8 |
| Three nearest companies, miles away | 0.5, 1.2, 2.8 |
| Mention Kenmore | 1 |
First up for East Wenatchee: Sears Appliance Repair (51.1 miles away, based in Moses Lake, 3.9 stars from 98 reviews, lists Saturday hours); Sears Appliance Repair (76.7 miles away, based in Omak, 4.4 stars from 36 reviews, lists Saturday hours); Sears Appliance Repair (72.0 miles away, based in Toppenish, 4.4 stars from 37 reviews, lists Saturday hours); Sears Appliance Repair (0.5 miles away, 4.5 stars from 134 reviews, lists Saturday hours).
Kenmore Dryer Lines and Features
What a Kenmore Dryer Technician Deals With
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Says to Check First
- Clothes wrinkled after drying. Kenmore says to remove clothes promptly, avoid overloading, and use Wrinkle Guard or a short touch-up cycle. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Check Vent light blinking. Kenmore says the exhaust is seriously restricted and the ducts should be cleaned and inspected before using the dryer again. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore Dryer Error Codes
| Code | What it means |
|---|---|
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| tE1-tE7 (Elite steam dryers) | A temperature sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
When to Call for Kenmore Dryer Repair
- Drum will not turn even though you hear a hum
- Burning or hot smell during a cycle
- Squealing, thumping or grinding while it runs
What a Dryer Repair Technician Checks
Keeping a Kenmore Dryer Running
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
Price the repair before replacing a Kenmore dryer. Published ranges for common jobs:
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Kenmore Dryer Call
- How long the vent run is and where it exits the house
- The brand, model and serial number from the label inside the door or on the back panel
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Dryer Notes for East Wenatchee, WA
Most dryer calls in East Wenatchee come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
Washington's state plumber certification law defines plumbing as potable water, waste, medical gas and similar systems and does not list fuel gas piping, so gas line work is not part of the state plumber certificate. Source: Chapter 18.106 RCW, Plumbers
How to Choose a Dryer Technician Near East Wenatchee
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
- Will you check the vent and lint path as part of the visit?
- What is the service call or diagnostic fee, and is it applied to the repair?
Kenmore Dryer Repair FAQs: East Wenatchee, WA
How do I find a technician who knows Kenmore dryers?
Why does my dryer take so long to dry?
What makes a dryer stop heating?
Related Repair Pages for East Wenatchee
More Kenmore Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.