Serving Gillette, Wyoming and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

Dryer Repair in Gillette, WY

A local list of dryer repair companies near Gillette, WY, sorted by how closely they match dryer work, then by distance and public ratings.

Dryer down in Gillette?
Call our helpline to be connected with an independent dryer technician near you.
☎(888) 772-9805
✓6 companies listed for Gillette✓Independent, not a manufacturer✓Public ratings & distances

A dryer that stops heating or takes three cycles to finish a load turns laundry into a daily problem. Below are the companies within reach of Gillette, sorted by how closely they match dryer work, then by distance and public ratings.

Dryer Technicians Serving Gillette, WY

7 repair companies serve Gillette from within 83 miles. 2 list an address in Gillette, and other nearby bases include Sheridan (3) and Spearfish (2). Distances run up to about 83 miles. 3 of them mention dryer or washer-and-dryer work in their listing or website. Nearest on the list: Shield Appliance, around 1.2 miles out. The 4 rated companies in range average 4.5 stars. Gillette is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Appliance Repair
Shield Appliance
816 E 3rd St, Gillette, WY 82716
1.2 mi from Gillette
★★★★½ 4.5 (25 reviews)
Washer & Dryer Repair
Sears Appliance Repair
137 E Illinois St, Spearfish, SD 57783
82.4 mi from Gillette
DryersWashersSaturday hours
Appliance Repair
Appliance Repair Company
302 Wild Prairie Rd, Gillette, WY 82718
21.9 mi from Gillette
★★★★ 4.2 (53 reviews)
Washer & Dryer Repair
Sears Appliance Repair
1467 Coffeen Ave, Sheridan, WY 82801
79.3 mi from Gillette
DryersWashersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
2571 N Main St, Sheridan, WY 82801
81.4 mi from Gillette
DryersWashersSaturday hours
Appliance Repair
A Plus Plumbers & Appliance Repair, LLC
1150 Broadway St, Sheridan, WY 82801
80.6 mi from Gillette
★★★★½ 4.4 (53 reviews)

Companies are shown by relevance and distance from Gillette. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.

Gillette repair companies in numbers
Listing Saturday hours3
Distance to the three closest (mi)1.2, 21.9, 79.3
Rated 4.5 stars or higher (10+ reviews)2
Mention a major dryer brand0
Companies within 83 miles7
List dryer or washer & dryer work3

First up for Gillette: Shield Appliance (1.2 miles away, 4.5 stars from 25 reviews); Sears Appliance Repair (82.4 miles away, based in Spearfish, lists Saturday hours); Appliance Repair Company (21.9 miles away, 4.2 stars from 53 reviews); Sears Appliance Repair (79.3 miles away, based in Sheridan, lists Saturday hours).

⚡ One call to reach a local dryer repair company
☎(888) 772-9805

When to Call for Dryer Repair

  • Burning or hot smell during a cycle
  • Drum turns but the air stays cool
  • Clothes still damp after a full cycle
  • Dryer will not start when you press Start

What Usually Goes Wrong

Power and gas supplyA half-tripped breaker on a 240-volt circuit or a closed gas shutoff can look exactly like a broken dryer.
Safety fuses doing their jobA blown thermal fuse is a symptom, not just a part. It usually means the dryer overheated, often because of restricted airflow.
Heat-source failuresElectric elements burn out and gas igniters and valve coils weaken with age. Either one leaves the drum turning with no heat.

Inside a Dryer Repair Visit

Igniter, valve coils and flame sensorGas dryers light the burner with a glowing igniter, open the gas valve with a set of coils and confirm the flame with a sensor. When the igniter glows but the burner never lights, the valve coils are a frequent culprit.
Thermal fuse and thermostatsA thermal fuse is a one-time safety device that opens when the dryer overheats. A blown fuse usually points to a blocked vent, so a good technician replaces the fuse and finds out why it blew.
Airflow and the ventA long dry time is most often an airflow problem. A technician checks the lint screen housing, the duct behind the dryer and the exhaust hood outside before replacing any heating parts, because a restricted vent can make a healthy dryer look broken.

Check the Vent Before You Call

Never run a dryer without its lint filter, and clean the filter before or after every load; also clear lint that collects behind the dryer. Source: U.S. Fire Administration (FEMA) - Clothes Dryer Fire Safety

Fasten duct joints with clamps or foil tape rather than screws, which protrude into the duct and snag lint. Source: U.S. DOE Building America Solution Center (PNNL) - Proper Clothes Dryer Venting

More: clogged dryer vent warning signs.

What Dryer Repair Costs in Gillette

Most dryer repairs involve a modest part and an hour or so of labor. Reference ranges from published cost guides:

Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

Local Notes for Gillette

Most dryer calls in Gillette come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

The Wyoming State Fire Marshal licenses electricians, electrical contractors and limited technicians (including an HVAC category), and its licensing page lists no appliance repair license. Source: Wyoming State Fire Marshal: Electrical Licensing

Gas piping and gas appliance installer licensing in Wyoming is handled by local governments in at least some cities; Casper, for example, licenses gas utility installers to install gas piping from the building out and gas appliances. Source: City of Casper: Plumbing, Mechanical, and Individual Contractor Licenses

Hiring a Dryer Repair Company in Gillette

  • What guarantee do you give on parts and labor?
  • Can you give a written estimate before ordering parts?
  • What is the service call or diagnostic fee, and is it applied to the repair?

Dryer Repair FAQs: Gillette, WY

Is there anything I can try first?
Confirm the breaker or gas is on, clean the lint screen, and make sure the vent hood outside opens when the dryer runs. If the vent is blocked or crushed, clear it before running the dryer again.
Is a squeaking dryer dangerous?
Squeaks and squeals usually come from worn drum rollers, the idler pulley or the drum glides. They are not dangerous right away, but worn parts can damage the belt or drum if they are left too long.
What makes a dryer stop heating?
On an electric dryer the usual suspects are the heating element, a blown thermal fuse, a failed thermostat or a tripped breaker on one leg of the circuit. On a gas dryer, check that the gas is on, then the igniter and valve coils. A blocked vent can trip the safety fuse on both types, so it should be cleared first.
Is the helpline a manufacturer?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your dryer is still under manufacturer coverage, contact the brand first.

Dryer Repair by Brand in Gillette

More Dryer Repair Pages Nearby

Before you call a Gillette technician, check the breaker or gas shutoff, clean the lint screen and look at the vent hood outside. If the dryer still misbehaves, have the model number ready.

Skip the calling around: we will find a dryer tech for you
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech